Members Joe21 Posted March 17, 2014 Members Report Posted March 17, 2014 What are the limitations for this machine. I know no heavy leather but I was wondering if it would work for some heavy canvas and light leather. Thanks, Joe Quote
Members Colt W Knight Posted March 17, 2014 Members Report Posted March 17, 2014 (edited) Should work just fine. Those old Singers don't have a lot of features, but they sure were tough. Edited March 17, 2014 by Colt W Knight Quote
Members Joe21 Posted March 17, 2014 Author Members Report Posted March 17, 2014 Can it handle #69 or #92 thread? Quote
Members Colt W Knight Posted March 17, 2014 Members Report Posted March 17, 2014 I think you need a #18 needle for 69 thread and a #20 needle for 92 thread, but I am not a sewing machine expert by any means. Here is a PDF of the manual for that machine http://parts.singerco.com/IPinstManuals/95-10.pdf Quote
Members leecopp Posted March 18, 2014 Members Report Posted March 18, 2014 Hi This is Lee down in Sunny Florida, These machines were generally designed for medium speed (3000 spm ) garment sewing. I did some testing on a 95-1 and could never make it happy beyond V69 thread. This machine was my first introduction to industrial machines and it gave "sewing your finger" a much more vivid image. They are sometimes called 3/4 size industrials .. just a inch wider than a domestic (If I remember correctly). I have a 95-10 with very small, light weight balance wheel indicating that this machine was meant to run fast and light .. For heavy canvas I would look for a walking foot or preferably a compound feed. Happy Day Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.