Jump to content

Recommended Posts

  • Members
Posted

What kind of kit would you recommend. I'm hoping to dive into the craft fairly full time so I was wondering am I better off getting a bigger kit. Or basic and buy stamps as I go?

  • Members
Posted

Welcome. I would start small as you will find out that as you go along that what you want will change. -- Tex

Tex-Shooter - Winner of the 2003and 2004 Summer Nationals Slingshot Tournament.

--------------------------------------------------------------------------------

Too soon old/too late smart

--------------------------------------------------------------------------------

“It is better to remain silent and thought a fool, than to open ones mouth and remove all doubt” Abraham Lincoln

--------------------------------------------------------------------------------

My YouTube Channel ----- slingshotbill's channel - YouTube

  • 2 weeks later...
  • Members
Posted

I don't know where to start looking at all these links. Anyone have a specific kit they started with they can reccomend?

  • Members
Posted

As you have viewed all the videos available, you might check into Classes being offered at a Tandy store nearest you ?

There are usually beginners, intermediate, and advanced classes, and each offers some sort of a kit to complete that class, keep the tools acquired and now you have a starting tool collection,.and the instructors help along the way. some are one time classes, others go on for weeks. some of these new classmates friendships can last a lifetime too ! Just a suggestion, hope it might help !

  • 4 weeks later...
  • Members
Posted

No tandy store near me. How's this look for starting out? http://springfieldleather.com/29324/StarterSet%2CProfessionalProject/

I'm willing to invest as as to acquire enough to dive right in. I'm currently unemployed and hope to start this fairly full time. http://springfieldleather.com/29337/Starter-Set%2CBelt%26Project%2CDelux/

  • Members
Posted

Welcome to the very best leather place you will ever find LWN !!!!!!!!

As a humble newby myself, I just got what I needed at the time, am still in this mode somewhat as a matter of fact.

However once you finally see, well, I only used this once, and that only twice -your begging to get the picture. These tools are ok, if ever needed again. But, now you see the larger kit from Springfield has more of what you'll use now ? So I would go with that for now !

Still you will need to ask yourself where are you headed in this VAST world of Leather ?

I realize thats almost impossible at this point, being new an all. But you need a direction of some sort to advance, This is where the nearest classes come in, the you tube videos of course ! I also recommend you start off slow and concentrate on what you are learning,

LEARN Well, Then practice and practice some more !

Remember, were all here to help, but you gotta do it yourself. once you do, Then the vision will shine upon you. Good luck .

  • Members
Posted

DeadPhan, looking over the posts, I don't see where you ever said what project you were wanting to start out with. WIth some information as to the type of things you intend to do we may be able to give you better pointers on where to start. Kits are not always the way to go, they may seem cheaaper then buying individual items, however they don't work out that way if half of it is stuff you will never use. It may not only have things you won't use but may not have enough of what you need. doing light weight leather will take different items then heavier leather for holsters, horse tack etc.

  • Members
Posted (edited)

I'm Definitely gonna start out with smaller lighter stuff. I go to alot of concerts and music festivals and I'm hoping to be able to barter or sell some of my stuff as I get better. I figure I'll be making alot of belts, wallets, coasters, key fabs, patches for clothes. Maybe pockets and things. Flask holders. Lighter holders. Guitar, drum Straps. Over time Proly like fanny packs and small purses. Stuff like that. Maybe framed cuts for hanging on walls and such

Edited by DeadPhan
  • Members
Posted

I'd get a good maul (I don't have one yet - just the basic cheap one from Tandy but I got my eyes on Barry King) and a good swivel knife and make sure you know how to keep the blade sharp. My beginner Tandy kit did come with the jeweller's rouge for the knife blade but like these other guys have said, the kit's have more useless stuff than the useful stuff - UNLESS you get it on sale I would just make a list of the basic tools you need and try to get good ones. I take classes at my local Tandy but if you don't have one near you the people here and guys on youtube like Ian Atkinson and Nigel Armitage are great at showing how things get done.

The kits usually come with a lot of stuff but they are generally the cheapest version available for each item. Yeah you can get stuff done (I made the sporran in my avatar with that stuff) but as you get better you'll ache for better tools. If you have the money to spend you might as well get the good stuff right up front. IF it turns out you absolutely hate doing leatherwork, your good tools will be easy to sell. The good thing about the Tandy kits is they come with easy to follow instructions and projects to get your feet wet and include everything you need usually... (I have no experience with the Springfield kits).

Good luck, have fun and welcome to the forum!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...