Members bland Posted April 25, 2014 Members Report Posted April 25, 2014 I completed several pancake and IWB holsters recently. Please take a look and let me know what you think. Any suggestions would be appreciated. I would particularly like comments and suggestions on the cross draw holster. Quote
mlapaglia Posted April 25, 2014 Report Posted April 25, 2014 Nice work. It all looks good. Personally Im not fond of exposed rivets on the back. You might consider using a T-nut between the two layers. Your slot width is a little large for my tastes. Other than that it all looks good to me. Keep it up. Quote The key to immortality is first living a life worth remembering. Bruce Lee
Members bland Posted April 27, 2014 Author Members Report Posted April 27, 2014 Thanks for the input. I never thought of using a T-nut in between layers. What belt slot width do you recommend? Quote
mlapaglia Posted April 27, 2014 Report Posted April 27, 2014 I normally use a 5/8" slot with. FYI on a T-nut you will need to trim the prongs on the nut so they don't stick out of the leather. Quote The key to immortality is first living a life worth remembering. Bruce Lee
Members bland Posted April 28, 2014 Author Members Report Posted April 28, 2014 I'll try that on the next one. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.