bland Report post Posted April 25, 2014 I completed several pancake and IWB holsters recently. Please take a look and let me know what you think. Any suggestions would be appreciated. I would particularly like comments and suggestions on the cross draw holster. Quote Share this post Link to post Share on other sites
mlapaglia Report post Posted April 25, 2014 Nice work. It all looks good. Personally Im not fond of exposed rivets on the back. You might consider using a T-nut between the two layers. Your slot width is a little large for my tastes. Other than that it all looks good to me. Keep it up. Quote Share this post Link to post Share on other sites
bland Report post Posted April 27, 2014 Thanks for the input. I never thought of using a T-nut in between layers. What belt slot width do you recommend? Quote Share this post Link to post Share on other sites
mlapaglia Report post Posted April 27, 2014 I normally use a 5/8" slot with. FYI on a T-nut you will need to trim the prongs on the nut so they don't stick out of the leather. Quote Share this post Link to post Share on other sites
bland Report post Posted April 28, 2014 I'll try that on the next one. Thanks. Quote Share this post Link to post Share on other sites
