Members Leewood Posted October 20, 2008 Members Report Posted October 20, 2008 I'm not a leather worker adn this is my first post here. I was recently in Taos and saw a belt with actual silver dollars or half dollars as conchos. I don't know how they were attached but they were actual coins and not reproduction coin conchos. Any idea as to how they were attached to the belt? I've seen some where it looks like a metal loop or guide was welded to the back of some coins and the belt was threaded through. This belt was not that variety. I saw the $275 price and backed away. Now that I'm home I wonder how they were attached adn if I could attach some of my old coins to a belt. TIA. Lee Quote
Members Rawhide Posted October 20, 2008 Members Report Posted October 20, 2008 I'm not a leather worker adn this is my first post here.I was recently in Taos and saw a belt with actual silver dollars or half dollars as conchos. I don't know how they were attached but they were actual coins and not reproduction coin conchos. Any idea as to how they were attached to the belt? I've seen some where it looks like a metal loop or guide was welded to the back of some coins and the belt was threaded through. This belt was not that variety. I saw the $275 price and backed away. Now that I'm home I wonder how they were attached adn if I could attach some of my old coins to a belt. TIA. Lee You could just cut a hole in the belt a little smaller than the coin and gouge out a recess for it to sit in, then cover it with a liner. Marlon Quote Marlon
Members Kevin Posted October 20, 2008 Members Report Posted October 20, 2008 I used to know a buckle maker who domed the coins and soldered a Chicago screw on the back. Kevin Quote
Members JRedding Posted October 20, 2008 Members Report Posted October 20, 2008 Do you want to make a belt with a clean lined back ( no attachments showing ) or are you planning on attaching the coins after the belt is completed with the attachments showing. Because if you want a clean backside it's an entirely different process that requires a different method of attaching your coins ? Quote
Members Leewood Posted October 21, 2008 Author Members Report Posted October 21, 2008 You could just cut a hole in the belt a little smaller than the coin and gouge out a recess for it to sit in, then cover it with a liner.Marlon Marlon, Thanks for the reply. I am not sure what a liner is. Would it be a backing for the belt and coins so they didn't fall out? What would I "gouge" with? Have you done this or seen examples of this process? Any danger the coins would fall out? Thanks. Lee Quote
Members Leewood Posted October 21, 2008 Author Members Report Posted October 21, 2008 I used to know a buckle maker who domed the coins and soldered a Chicago screw on the back. KevinKevin,Thanks for your reply.What is the purpose of doming the coins and is that done with a press, heat, hammer?Not sure what a Chicago screw is or how to solder to coin silver. I guess I could do more research and or find a jeweler to do this for me. My hope is that there was a way to attach them w/o damaging them. I have seen coins with a band around them to use as pendants on necklaces and thought there might be a band that fit the coin, then had prongs that would go through the belt and be bent back on the back side of the belt to hold them in place. I thought there might be something like that.LeeDo you want to make a belt with a clean lined back ( no attachments showing ) or are you planning on attaching the coins after the belt is completed with the attachments showing. Because if you want a clean backside it's an entirely different process that requires a different method of attaching your coins ?Thanks for replying.I don't care if the attachments show on the back or not.What might be a method to attach the coins to a belt? Any ideas?Thanks.Lee Quote
Bree Posted October 22, 2008 Report Posted October 22, 2008 Kevin,Thanks for your reply.What is the purpose of doming the coins and is that done with a press, heat, hammer?Not sure what a Chicago screw is or how to solder to coin silver. I guess I could do more research and or find a jeweler to do this for me. My hope is that there was a way to attach them w/o damaging them. I have seen coins with a band around them to use as pendants on necklaces and thought there might be a band that fit the coin, then had prongs that would go through the belt and be bent back on the back side of the belt to hold them in place. I thought there might be something like that.LeeThanks for replying.I don't care if the attachments show on the back or not.What might be a method to attach the coins to a belt? Any ideas?Thanks.Lee I know a guy who does this. He domes the coins so the attachment of the Chicago screw isn't visible. It sits under the dome. He built a doming jig out of coved out leather layers and just puts the coin in there and bangs away with his ball peen hammer. In a few seconds it's beautifully domed. A Chicago screw is similar to a rivet but it screws in so it is removeable. It is soldered in using a good solder for attachments. I think he used silver solder. Prongs would work also but you would need to solder them on as well. I think the Chicago Screws are the easiest method. My $.02 Quote Ride Safe! Bree 2003 Dyna Wide Glide Memberships: Iron Butt Association, Niagara Falls HOG, Wild Fire HOG NRA, Niagara County Sportsman's Association
Contributing Member Jordan Posted October 22, 2008 Contributing Member Report Posted October 22, 2008 (edited) There was a post, pre-crash I think, from a member that did inlays of flat bottomed stones in bracelets, and a explanation of how to do it. Perhaps someone could resurrect it or if they know who it was, could convince them to repost? If memory serves it was a two layer process with reverse bevel cutouts in the top piece, that held the stones in place, very beautiful items. It would probably work with coins also, and in rough times they could still be spent on more leather stuff. Edited October 22, 2008 by Jordan Quote
Members Echo4V Posted October 22, 2008 Members Report Posted October 22, 2008 I think Marlon's method is what you are wanting as it won't damage the coin and if done properly there is no way to lose the coin. To put it more in lay terms you take the belt and punch a hole in it just a little smaller than the coin, lay the coin on the back of the belt( so it can be seen through the hole) and then sew something onto the back of the belt that will cover the coin and hold it in place. I have also seen this method (kinda the opposite of what Marlon suggested) where the coins are layed out on the out side of the belt then a peice of leather is cut in a design with round spots where the coins are and smaller runs between the coins then that second piece is sewn on the top of the belt with the coins in between (kinda the way a ranger belt is two peices sewn together). I think this way looks the best but that's just my opinion. Hope this helps David Quote
Members tonyc1 Posted October 22, 2008 Members Report Posted October 22, 2008 I'm sure you'd be able to "dome" them using a vise. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.