Members alackofcolor Posted July 28, 2014 Members Report Posted July 28, 2014 My first wallet, following the template sold by Ian Atkinson of YouTube fame. Quote
Members Jon P Posted July 28, 2014 Members Report Posted July 28, 2014 Great job! Looks way better than the first wallet I did.... Quote
Members Hi Im Joe Posted July 28, 2014 Members Report Posted July 28, 2014 Looks a lot better than my first wallet too! LOL. The only critique I have is I think a smaller thread would look a bit better. That thread is really filling out the holes. But this is just personal preference and your stitching looks great! Quote http://www.sevenhillsleather.com/
Members alackofcolor Posted July 28, 2014 Author Members Report Posted July 28, 2014 I thought about smaller stitches too, but considering it's a very simple design overall, there's really not much going on except for the stitching. Hammering down the stitches on the outside surfaces would help a bit with the puffing of the leather coming out of the holes, but unfortunately the thread loses its vibrancy of color if you hammer on it too much. If I had it to do over again, I would either use 0.6 mm thread instead of 0.8, or I would have hammered the pricking iron through a little further to make the holes bigger on the outside surfaces. But it's not too bad for my fourth leather project. Quote
Members Greg528it Posted July 28, 2014 Members Report Posted July 28, 2014 Looks Great. I get the comment on the smaller stitching, here I kind of like them with the big thread. What are you sewing with? Hand or what machine? Quote
Members alackofcolor Posted July 28, 2014 Author Members Report Posted July 28, 2014 I'm doing the stitching by hand, due to my fear of sewing machines. I punched diamond-shaped holes with a Japanese pricking iron and then saddle stitched the layers together. Quote
Members bethefawn Posted July 28, 2014 Members Report Posted July 28, 2014 I don't mind the thickness of thread, but I wonder how it would look with a darker type. (Only reason I even question anything about it is that I am unspeakably jealous. I've made half a dozen wallets in the last year or so and only recently come close to that level of skill, and even then I wouldn't put mine up against yours!) Quote
Members Hi Im Joe Posted July 28, 2014 Members Report Posted July 28, 2014 I thought about smaller stitches too, but considering it's a very simple design overall, there's really not much going on except for the stitching. Hammering down the stitches on the outside surfaces would help a bit with the puffing of the leather coming out of the holes, but unfortunately the thread loses its vibrancy of color if you hammer on it too much. If I had it to do over again, I would either use 0.6 mm thread instead of 0.8, or I would have hammered the pricking iron through a little further to make the holes bigger on the outside surfaces. But it's not too bad for my fourth leather project. Like I said it's really personal preference. You did an awesome job for your 4th leather project. Quote http://www.sevenhillsleather.com/
Members Rohn Posted July 28, 2014 Members Report Posted July 28, 2014 That is a beauty. Very nice work! Quote Rohn(John 8:32) And ye shall know the truth, and the truth shall make you free. (KJV)
Members alackofcolor Posted July 28, 2014 Author Members Report Posted July 28, 2014 I don't mind the thickness of thread, but I wonder how it would look with a darker type. (Only reason I even question anything about it is that I am unspeakably jealous. I've made half a dozen wallets in the last year or so and only recently come close to that level of skill, and even then I wouldn't put mine up against yours!) I actually made another one with a dark brown thread so I could actually use it without the stitching getting dirty. It looks nice and would probably be my preference if I could have only one. But for emphasizing the stitch, the lighter thread definitely displays it a bit better. Like I said it's really personal preference. You did an awesome job for your 4th leather project. It is, but you definitely had a point. And thanks, it's a fun hobby to pick up. It all started because my dad gave me a .45 single action revolver and I wanted to make a holster and gun belt for it. That was my first project back in late May, which I'll probably post eventually. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.