Members capsterdog Posted November 11, 2014 Members Report Posted November 11, 2014 PM me when you get them for the dremmel tool
Members slipangle Posted November 11, 2014 Author Members Report Posted November 11, 2014 Love to hear that Charlie! Thank you Scott Thanks for the burnisher Slipangle. It is perfect, just what I was hoping it would be. Charlie Will do, C-dog thank you Scott PM me when you get them for the dremmel tool
Members Jumpout Posted November 19, 2014 Members Report Posted November 19, 2014 Please let me know when you finish the ones for the Dremel.
Members slipangle Posted November 19, 2014 Author Members Report Posted November 19, 2014 I'll try, Jumpout, and thanks. But I have to be honest. It may be a while. Circumstances of life may not allow for it for a while. But we'll see, Thanks Scott Please let me know when you finish the ones for the Dremel.
Members JGB Posted April 21, 2015 Members Report Posted April 21, 2015 Hi, I would love to buy one of these from you. Please let me know if you have anymore or if you can make me one. What size is the shank? Thank You, JGB
Members jwallace Posted April 22, 2015 Members Report Posted April 22, 2015 #2 SOLD. Pending payment. Thanks. I'm going to do up some small burnishers for Dremel tools too. Stay tuned. I look forward to this! I'd love one with similar grooves and a hole burnishing tip. STEADFASTSTRAPS.COM
Members slipangle Posted April 24, 2015 Author Members Report Posted April 24, 2015 Hi JGB, Sorry for the late reply. I just got in last night from 8 days in Belize. Thank you for the note, and interest. However, I doubt I'll be making any more burnishers out of this wood. I may, but it is doubtful. The reason is I used the last small blank of it to make two awl hafts. I did find one more small piece of the wood in my wood stash but I probably won't make burnishers out of it. It is just too rare these days and I think other woods will work as well, or better, as burnishers. For now, I'm concentrating on awl hafts though. If I come up with something else though, I'll keep you posted. Thanks again. By the way, the shank on those two I made was 1/4 inch. Thanks, Scott Hi, I would love to buy one of these from you. Please let me know if you have anymore or if you can make me one. What size is the shank? Thank You, JGB
Members slipangle Posted April 24, 2015 Author Members Report Posted April 24, 2015 Hello, Sorry for the tardy reply. I just got back in last night from 8 days in Belize. Thanks for the note, and interest. I may yet try some very small burnishers out of lignum vitae but, to tell the truth, I may try it with other woods. The main problem I've found with this wood is attaching the shank to the wood. I haven't tried it yet with this wood, and 1/8 shanks, but gluing this wood is nearly impossible, given its extremely high oil content. I may try some experimenting soon, to see if I can get a good, tight press fit, and avoid the burnisher spinning on the shank. But for now, I'm still concentrating on awl hafts. If I come up with something that works well enough to sell them , though, I'll let you know. Thanks, Scott I look forward to this! I'd love one with similar grooves and a hole burnishing tip.
Members JGB Posted April 24, 2015 Members Report Posted April 24, 2015 Ok. Thanks for letting me know. If you do come up with one out of another wood, especially with an 1/8" shank, I would love to buy one. Thanks, JGB
Recommended Posts