Members Davi Posted November 10, 2014 Members Report Posted November 10, 2014 (edited) Ive been looking at glass slickers but really didnt want to pay £25 so I decide dto pop into my local glass supplier. 10 Minutes later I walked out with two glass slickers costing £1 each. I didnt get the edges totally rounded, just got the sharp edges took off but if I want another one with rounded edges he can do it but it will take a little longer to do. He was gob smacked when i told him how much these cost at a leathercraft supplier. I suggested that he sold them for a couple of quid a piece and told him I would let local leather workers know to come to him for them. If he decides to start charging too much, I have another 3 glass suppliers very close also. The measurements I had it made to were 6mm thick, 11.5cm long, 9cm wide. Edited November 10, 2014 by Davi Quote
Members Colt W Knight Posted November 11, 2014 Members Report Posted November 11, 2014 I went into a local glass fab store, and they quoted me 77$. I wish I could find a store like yours locally. Quote
Members Davi Posted November 11, 2014 Author Members Report Posted November 11, 2014 Its a pity shipping to america isnt cheaper as $77 is outrageous. Quote
Members Colt W Knight Posted November 11, 2014 Members Report Posted November 11, 2014 Yup, 20$ piece of glass, and 57$ fee to round the corners. Quote
Members Davi Posted November 11, 2014 Author Members Report Posted November 11, 2014 Yup, 20$ piece of glass, and 57$ fee to round the corners. He only knocked the sharp corners off this piece, he can round them but it would take longer and I was willing to try it like this first. I have a feeling that they would probably just use off cuts that were no good for anything else and it only took about 3 mins to do it. Quote
Members RiverCity Posted November 12, 2014 Members Report Posted November 12, 2014 Another way to get there on the cheap is glass drink coasters. If you hit thrift stores from time to time, you can find stuff under a dollar. Chuck Quote
Members RiverCity Posted November 12, 2014 Members Report Posted November 12, 2014 https://images.promotionsonly.com.au/product/corporate-glass-coaster.jpg http://www.handmadeinpa.net/wp-content/uploads/2009/02/sandy5.jpg Heres a couple examples of what Im talking about. Look for the thicker ones and youll save 20+ dollars. Chuck Quote
Members Colt W Knight Posted November 12, 2014 Members Report Posted November 12, 2014 Nice, I am using a glass serving plate right now. I will look for those coasters. Quote
Members humperdingle Posted November 12, 2014 Members Report Posted November 12, 2014 Ive been looking at glass slickers but really didnt want to pay £25 so I decide dto pop into my local glass supplier. 10 Minutes later I walked out with two glass slickers costing £1 each. I didnt get the edges totally rounded, just got the sharp edges took off but if I want another one with rounded edges he can do it but it will take a little longer to do. He was gob smacked when i told him how much these cost at a leathercraft supplier. I suggested that he sold them for a couple of quid a piece and told him I would let local leather workers know to come to him for them. If he decides to start charging too much, I have another 3 glass suppliers very close also. The measurements I had it made to were 6mm thick, 11.5cm long, 9cm wide. Buy a load off him and shove them on ebay? Quote
Members Davi Posted November 12, 2014 Author Members Report Posted November 12, 2014 Buy a load off him and shove them on ebay? I thought about it lol. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.