New Problem That I Just Cant Figure Out

[cleanview]

3 things.

1. it does not seem to be "kinky" or "twisty" thread.

2. I may try to extend the bar.

3. I know get the juki illustration.

Is is common as the take up lever moves up and down for there to be enough slack so that the thread can reach the bar.

[pcox]

yes . it has to have slack to let the thread go around the bobbin.

[msdeluca]

Can you take pictures of the entire thread path?

[Gregg From Keystone Sewing]

Am I missing something here?

[Red Cent]

Interesting. I went on a search for info on the CB 3200 and found a YouTube video by Jess Jones. He does not thread it correctly. Cowboy Bob, you might want to watch the video. The error comes just after 4:15. Or is the post a trade off for the eyelet?

https://www.youtube.com/watch?v=o3DSXBVBJkA

The 3200 is a bit different to thread compared to the 4500 or the Cobra 4. The CB 4500 threads like the Cobra 4 except for the post with holes on top of the machine.

I still think I can come up with 197 ways to thread the C4 and come up with like tension at the needle. I thread mine a bunch different than factory.

Edited December 16, 2014 by Red Cent