Members cgleathercraft Posted February 3, 2015 Members Report Posted February 3, 2015 Metal Corner protectors WAY too many to count. $0.05 per piece + shipping Depending on how many ordered I may cover shipping and give discount.
Members Troy Burch Posted February 3, 2015 Members Report Posted February 3, 2015 (edited) How big are these? lol, never mind It helps when I read the header. Edited February 3, 2015 by Troy Burch
Members cgleathercraft Posted February 3, 2015 Author Members Report Posted February 3, 2015 No worries! Been there, done that myself
Members rlpullman Posted February 3, 2015 Members Report Posted February 3, 2015 What is the maximum thickness theses can be used on?
Members cgleathercraft Posted February 3, 2015 Author Members Report Posted February 3, 2015 I will get the measurement tonight.
Members cgleathercraft Posted February 4, 2015 Author Members Report Posted February 4, 2015 I wouldn't go more than 10 oz. They fit very cleanly on the 6 and 8 oz pieces I tried. 12 oz (two 6 oz pieces back to back) was too thick.
Members Troy Burch Posted February 4, 2015 Members Report Posted February 4, 2015 Are you in the USA?
Members capsterdog Posted February 4, 2015 Members Report Posted February 4, 2015 Are they easy to bend over?
Members cgleathercraft Posted February 4, 2015 Author Members Report Posted February 4, 2015 Are you in the USA? Yes Northern Missouri, about 1.5 hours north of KC Are they easy to bend over? I used a small tack hammer that I picked up at Menards. Light taps had them holding strong enough that it took pliers to get them off. I believe a small arbor press would work better to crimp them a little tighter but I don't have one to test with.
Members cgleathercraft Posted April 8, 2015 Author Members Report Posted April 8, 2015 I have about 3000 of these left. Every reasonable offer considered.
Members cgleathercraft Posted April 9, 2015 Author Members Report Posted April 9, 2015 Sold, Pending Payment.
Members cgleathercraft Posted April 9, 2015 Author Members Report Posted April 9, 2015 Sold, Thank you everyone!
Recommended Posts