Nessmuk1 Report post Posted February 5, 2015 I can't find a way to change the stitch spacing on my machine. It has a black plastic, spring loaded paddle on the front where I would expect the stich spacing control to be, but it seems to loch the machine when it is pressed down. No change in spacing. Quote Share this post Link to post Share on other sites
Constabulary Report post Posted February 5, 2015 keep the small pedal pushed and then you can change the stitch length by turning the hand wheel but the is no indicator for the stitch length. If it is not working most likely the mechanism is clogged up with old oil I´d say. Do you have a manual for your machine? Quote Share this post Link to post Share on other sites
Nessmuk1 Report post Posted February 5, 2015 I don't have the manual, just the old Singer one. Didn't know about holding and turning. THANK YOU! Quote Share this post Link to post Share on other sites
