Members rlpullman Posted March 1, 2015 Members Report Posted March 1, 2015 I have seen several sites where they have holsters that have a type of retention adjusting screw. They look kind of like a Chicago screw with a rubber grommet. They are used to adjust the amount of retention on the hand gun. Does anyone here know of a supplier where I can get these? Quote
Contributing Member TwinOaks Posted March 1, 2015 Contributing Member Report Posted March 1, 2015 Local hardware store- You'll need a t-nut, a bolt, a finish washer (aka 'cup washer'), and about 1/2" of rubber hose from the plumbing section. Quote
Members camano ridge Posted March 1, 2015 Members Report Posted March 1, 2015 (edited) Like Twin oaks said you can get pretty much everything you need at a hardware store or one of the big box stores. Below is a picture that shows pretty much every thing you need. If you don't want to collect everything you need you can get what you need from Rob Bennett the bluegunstore.com. Index fastners http://www.ifithermoplastics.com/category/fasteners also has everything you need. Edited March 1, 2015 by camano ridge Quote
Members rlpullman Posted March 1, 2015 Author Members Report Posted March 1, 2015 Thanks you guys. That's too easy Quote
Members cgleathercraft Posted March 2, 2015 Members Report Posted March 2, 2015 I ordered all my hardware from here: . Index fastners http://www.ifithermoplastics.com/category/fasteners hasn't shown up yet, and I don't use hardware for retention but they had everything I wanted/needed and were way cheaper than the hardware store. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.