Jump to content

Recommended Posts

  • Contributing Member
Posted

Cleaning up time around here again. One day, I'll be smarter, and I'll do it BEFORE tax time inventory!

Anyway, I have some 1 1/2" wide strips of Hermann Oak tooling leather in 6/7 and 7/8 oz, along with some other irregular pieces that should get used.

The belt strips are the same leather I use for the belts on the etsy site (link below), which are carved and then lined with either 2/3 or 3/4 oz lining.

I see that SLC sells strips (don't know if they're even H.0.) and the "wholesale" price is $15. This seems extreme to me, since I can buy B-grade backs (no belly leather) and cut my own for more like $10.

Any interest, lemme know what you need and how long - I think most of these strips wil be in the 45-55" range.

I do want to clean out around here, but largely the idea is to boost the 'new guy', so how 'bout we give the newcomer a shot at these. Buy a few, and I'll 'toss in' some 3/4 to line 'em with :)

Oh, I like paypal - but I don't care for ebay, so ....

  • Contributing Member
Posted (edited)

Enough responses to this to post pics under here. There's actually a bit more than this, but this will give a fella the main idea. Tossin' in some 3/4 oz to line straps with, and there'll be a bit o W/C when I trim a couple hides, which goes if a guy kin use it.

Good lookin' leather front and back. Oh -- tha's a 6' ruler and a 24" square ... so ... I flipped 'em over and wrote the length on some ...

post-13153-0-89799300-1425514254_thumb.j

post-13153-0-78471800-1425514310_thumb.j

post-13153-0-82156700-1425514322_thumb.j

Edited by JLSleather
Posted

Do we order on the Etsy site or let you know here?

  • Contributing Member
Posted

There's no "ordering" ta do, just a clean up where i thought I could see my space and a fella could git decent leather without a mortgage :)

There is one fella spoke up earlier might want some, let's give 'im a chance to decide if he wants it :)

Posted

Sounds good but I'd be interested in some if you have any left. It would be a good way for me to try to improve w/o spending a fortune.

Thanks,

Chris

  • Members
Posted (edited)

I would also be interested in 3 55'

Edited by Ta2ooz
  • Contributing Member
Posted

That batch is gone, fellas. I'll do some more diggin later this afternoon. ;)

  • Members
Posted

Thanks anyways

  • Contributing Member
Posted

Glad you liked 'em :) Now, how 'bout some pics o them holsters ya was talkin about makin'?

Guest
This topic is now closed to further replies.
×
×
  • Create New...