Ambassador pete Posted November 25, 2008 Ambassador Report Posted November 25, 2008 got a job making a few dozen I.D. tags. I punch a hole for a split ring attachment but I want to put an eyelet in the hole. I have the little brass TLF ones that are pre-cut/scored . What should I use to tap down the brass notches. I have been bending each one down with the tip of a screwdriver! Is there a simple tool to crimp it properly? pete Quote
Ambassador Luke Hatley Posted November 25, 2008 Ambassador Report Posted November 25, 2008 got a job making a few dozen I.D. tags. I punch a hole for a split ring attachment but I want to put an eyelet in the hole.I have the little brass TLF ones that are pre-cut/scored . What should I use to tap down the brass notches. I have been bending each one down with the tip of a screwdriver! Is there a simple tool to crimp it properly? pete pete take a look at the Tandy Eyelet setter. you might want to look at the small Groments i like them better. Quote Luke
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.