Members Steelart999 Posted December 10, 2023 Members Report Posted December 10, 2023 I have a Cowboy Outlaw coming which includes some 277 thread. I've repeated seen the suggestion to use 207 thread on the bobbin. Is that a good option for this machine for sewing holsters, belts and sheaths, or should I just move forward with just the 277? Quote
CFM Frodo Posted December 14, 2023 CFM Report Posted December 14, 2023 I have tried using different size threads and I find it is a total pita sometimes you have to flip your work over and sew from the back to the front having different threads causes you to stop and switch bobbin and retread machiner Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
Contributing Member JLSleather Posted December 14, 2023 Author Contributing Member Report Posted December 14, 2023 On 12/10/2023 at 9:13 AM, Steelart999 said: I have a Cowboy Outlaw coming which includes some 277 thread. I've repeated seen the suggestion to use 207 thread on the bobbin. Is that a good option for this machine for sewing holsters, belts and sheaths, or should I just move forward with just the 277? I like 277 over and 207 under. I've tried other combinations, but I like this one. Yes, for holsters, belts, sheaths. On 11/28/2023 at 5:25 PM, Steelart999 said: Jeff, thank you for that feedback. I guess I've been leaning towards the concept of not cutting the surface layer, although what little I've done was with a groover. Do you recall the make of the creasers you've preferred? Doesn't matter, long as it's smooth faced. I've seen some that were plated. Sounds nice, anti-corrosion and all that. Until the plating chips, and then you're just scarring everything you try to crease. Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted December 16, 2023 Author Contributing Member Report Posted December 16, 2023 Uploading a couple NEW patterns over there JLSbydesign - Etsy Glock 17/19 double mag is on and ready. Bond Arms Bullpup 9mm mag ('pancake'). Sig P938 double mag hi angle (guy wanted it designed to carry almost in back). Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted December 17, 2023 Author Contributing Member Report Posted December 17, 2023 added Taurus G2C mag (single) and S/W SHield 9/40 double mag Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted December 23, 2023 Author Contributing Member Report Posted December 23, 2023 Added pattern for single mag carrier, fits G43x, G48 Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted January 13, 2024 Author Contributing Member Report Posted January 13, 2024 anybody making pocket holsters these days? Would like to get some patterns uploaded to Cutesy, but need to lnk a bit of hardware for some. I mean like these.... Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted January 13, 2024 Author Contributing Member Report Posted January 13, 2024 Somebody got a xdm .40 print this and lemme know 'f its close.. XDM40sketch.pdf Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members Steelart999 Posted January 13, 2024 Members Report Posted January 13, 2024 6 hours ago, JLSleather said: Somebody got a xdm .40 print this and lemme know 'f its close.. XDM40sketch.pdf 11.45 kB · 2 downloads I'll check against my XDM .40 later this morning and get back to you. Quote
Contributing Member JLSleather Posted January 13, 2024 Author Contributing Member Report Posted January 13, 2024 5 hours ago, Steelart999 said: I'll check against my XDM .40 later this morning and get back to you. cool - let us know here how close this is, so other folk know it's good to use Quote "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.