Members Tina Posted January 28, 2008 Author Members Report Posted January 28, 2008 Dale, I looked at the link...This is actually something I have at home but hesitate to use on leather. The reason it's not as flexible as I would wish for, in other word, it could crack easy (?) TwinOaks I'm not looking for oil, just a non water/acrylic lacker (laquer), type super sheen where you get a clear surface but oil/thinner based. Ideal might be the clear stuff you have on type mahogany boats, that must be flecible but I'm not sure how the leather will react. I found this one on Tandy, but I probaly have to call them to see if this is what I'm looking for: Master Quick Shine Spray 13 oz 84300-000 The shoe repair shop secret to a high gloss shine. Good for luggage, handbags, shoes and boots. It is ORM-D and must be shipped by ground. Can someone tell me what ORM-D is? I'll keep posting when I have jumped over a hurdle:-) Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Contributing Member TwinOaks Posted January 28, 2008 Contributing Member Report Posted January 28, 2008 "other regulated materials, domestic" Basically, it's got some ingredients that airlines/shipping companies don't want on their airplanes.....just in case. Quote Mike DeLoach Esse Quam Videri (Be rather than Seem) "Don't learn the tricks of the trade.....Learn the trade." "Teach what you know......Learn what you don't." LEATHER ARTISAN'S DIGITAL GUILD on Facebook.
Members Oscar B Posted January 28, 2008 Members Report Posted January 28, 2008 Use of Oil Paint ' Artist's oil paint, when used on natural-colored calf, steerhide, or sheepskin, shows up the grain and pores of the skin, giving a peculiar charm to the work. For oil painting of separate units of a design, however, the leather requires "sizing" to prevent the oil from spreading. The process is therefore too precarious for one who cannot first see it done by an experienced worker. For coloring an entire surface, however, the work is simple and the results very beautiful. The leather is placed on a pad of newspapers, as for staining, but it is not wet. Mix the oil paint with turpentine to a very thin consistency. With a fairly large soft brush or preferably a wad of soft cloth, spread the paint evenly and quickly all over the leather and immediately wipe it off with a soft cloth, leaving just enough to settle and color the leather. When it is thoroughly dry, polish with a piece of soft chamois skin. THE BEACON HANDICRAFT SERIES LEATHERCRAFT for AMATEURS BY ELEONOBE E. BANG 1946 I found this old book on line and thought this may fit. Quote Life is too short to wake up with regrets. So love the people who treat you right. Forget about the ones who don't. Believe everything happens for a reason. If you get a chance, take it. If it changes your life, let it. Nobody said life would be easy, they just promised it would most likely be worth it."
Dale Posted January 28, 2008 Report Posted January 28, 2008 Ahhh....painting functional stuff. Some immediate thoughts are (it's late and I haven't thought any of these through): applying it in thin layer may work, Saddle-lac may work, possibly spray varnish for wood, or just leave it alone....it's going to rub off anyway (is oil more durable than acrylic?). Oscar, Interesting thought. I've done similar things with acrylic, but the oil may perform a little differently. I'll keep it in mind. Dale Quote Dale Hietala www.moonlightartstudio.com
Members Tina Posted January 28, 2008 Author Members Report Posted January 28, 2008 Oscar B Thank You, this is very interesting stuff. I like the look from oil paints much, much more than from acryllics, like soft velvet. Im going to give a practice piece a try and see what happends. I really don't need to thin it out but I guess you take away some of the oil in the paint by doing this. The info about mixing oil/acryllics make sense...Going to take that to my heart. Normaly if you mix in the same painting you always start out with the acryllic, then the oil, but letaher...Well it can crawl under, I did not think of that. This is why I love this web site:-) Dale Because my paint has the consistansy of soft room temperatured butter I can really paint this in very thin layers with out thinning it out. As said above, the benefit might be getting some of the oil out? Normally oil paint is much more durable than acryllics, and more beautiful, vivid, alive...Hard to put words to. The draw back is the drying time. You think it's going to rub of anyway? Lets see if this isn't something that can be solved (Detective Tina is on a mission)...Persistence Perseverance Patience :-) Have a great night all//Tina Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Dale Posted January 28, 2008 Report Posted January 28, 2008 Tina, When I said "thin layer," I was referring to the varnish. I suspect it's possible that a thin layer of varnish (sprayed on, e.g.) will have more flexibility than a heavy layer brushed on. 2-Shews actually used wood lacquer on some of his stuff and said it worked fine. Dale Quote Dale Hietala www.moonlightartstudio.com
Members Skipknives Posted January 28, 2008 Members Report Posted January 28, 2008 (edited) Hi guys,,i've been following this and wanted to ask if the piece will remain flat,,ie painting on the wall if so it may last for years but if it is on a piece that flexes i would think it would be much shorter. mind you i have only used oils on canvas, wooden panels and canvas board. to put a finer point on it preping the canvas the medium goes into the weave of the canvas or wood fibers then dries,,,i don't think leather will work that way unless it dosen't flex. PS: i love the translusents for half tones they give depth to a painting http://i196.photobucket.com/albums/aa55/sk...es/SH100195.jpg they creat the illution of transpairency when painting cloth Edited January 28, 2008 by Skipknives Quote Skip Slocum Phoenix Arizona http://skpslocum.googlepages.com/home
Members Tina Posted January 28, 2008 Author Members Report Posted January 28, 2008 Dale, You think alike:-) I'm thinking of using a spray, one to get it thin, two not to disurb the picture at all. Hi Skipknives and welcome to the discussion:-) I have never used a finisher on my oil paintings. I paint layer on layer upon layers (many super thin ones) and at the end there's quite a lot of oil in it and it gives a natural finish if you like. I know I still have paintings that I did decades ago and they are rolled up due to lack of storage space. Every now and again I unroll them and they are just fine, no cracks or nothing. The acryllic paintings with the same age, well, still OK but not as good and small cracks. Even if the paintings have many layers you can not tell, it looks as it's only one thin layer and all the grain on the canvas is still showing. I think people that paint "impasto" (thick layer in like 3D) might have a problem after some time? So...My thoughts is to paint very thin and to apply a very thin but durable layer of some finisher. It sounds good, lets see if it's going to work. I'm going to give the lioness plenty of time to dry before spraying any finisher on (IF it's still wet the finisher will go opac) The recommended time for a several layer oil painting is around 6 months, this leather one, well I hope a months or so will do it (???) Have a fab day every one//Tina Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Members Tina Posted March 18, 2008 Author Members Report Posted March 18, 2008 Some updates on this project... I painted a few leather pieces with oil paint and then added super shene, satin shene and another letaher acryllic I had at home. After letting the pieces be for 8(?) weeks or so they are just fine. I've tried to stress them as much as I can by hand and nothing changes. My conclusion is that this works. I figured out that the best was to apply very thin layers of oil paint, almost just rubbing it in (still possible to shade and so forth) I did not dilute it with anything, I might try turpentine the next time depending on the piece. As I can see, this paint goes in further into the leather than acryllic (which only sets on the very surface) If it is used on something that is going to get very used/abused close to the body i might not use oil paint, the top finish will probably rubb off and the oil paint smear off? Well, people, my 2 cents of worth in the subject:-) Quote "He who works with his hands is a laborer. He who works with his hands, and his head is a craftsman. He who works with his hands, and his head, and his heart, is An Artist" http://vildkorpens-laderlya.deviantart.com http://tupali.deviantart.com/
Ambassador Don101 Posted March 18, 2008 Ambassador Report Posted March 18, 2008 great news Tina ass i have loads of oil paints so yet another use for them rather than just the canvas, Don Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.