Jump to content
maka

Feedback On Cowboy Cb 4500

Recommended Posts

Hi looking to buy one in Australia good or bad for 2.5 mm to 10 mm leather

Share this post


Link to post
Share on other sites

Help wanted is like the classified ads in the newspaper. So I moved your post to leather sewing machines. Hopefully this will get you the responses you are soliciting.

Posts made in help wanted require moderator's approval before they can be seen by the rest of the users. This post will likely inherit the same behaviour.

Tom

Share this post


Link to post
Share on other sites

If you intend to use the CB4500 routinely to sew 2.5mm of leather, this may not be the best machine for you. Ditto if 10mm is the thickest you will be sewing. Move down one step to the CB227R, or the new, unadvertised CB341, both of which are cylinder arm, triple feed, walking foot machines of medium capacity.

Share this post


Link to post
Share on other sites

Hi Mick,

A lot also depends on thread size as the lighter machines are generally not great at much over M20 (138) on the bottom end.

As you also mentioned on fb wanting to to heavier material at times there probably isn't a "one size fits all" solution

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...