How to Install metal separating zippers..

[barra]

http://www.seattlefabrics.com/Structure%20...0a%20Zipper.jpg

Look at the pic of the zip with runner attached for orientation.

Now look at the pic of the chain zip. It doesn't matter if chain or teeth zip

You can feed the zip into the runner and you should notice the teeth hit up against a bar.

grab the tape at each corner and gently pull/tug. The teeth should now separate.

Continue to feed the zip on.

Barra

[broncobuster]

OK Noah Im assuming by wanting 2 sliders on it that you want to open it from different ends? If thats the case your zipper might not be capable of doing that. you have to have a two way zipper.

[RLong830]

I am looking for a tutorial or advise as to how to install a zipper in a leather project that a Brother Mason asked me to make. It is an Apron case that he wants two zippers used to open and secure the case. I have never made anything with a zipper before and this is kinda intimidating for me.

Thanks in advance to anyone willing to help me. Warning I am a visual person !

[RiverCity]

I am looking for a tutorial or advise as to how to install a zipper in a leather project that a Brother Mason asked me to make. It is an Apron case that he wants two zippers used to open and secure the case. I have never made anything with a zipper before and this is kinda intimidating for me.

Thanks in advance to anyone willing to help me. Warning I am a visual person !

Not sure what an apron case is? If you can provide a picture or sketch it would be easier to help.

Chuck