Members Jspool Posted December 30, 2015 Members Report Posted December 30, 2015 Hi, I am a complete newbie when it comes to sewing machines. I have started to make knife sheaths. Can someone let me know how thick I can expect to sew veg tanned leather with this machine? Please keep in mind I am a hobbies and not doing production work. Most of my sheaths will be 5/8"or less. I have looked for information on the Adler 105-64, but it seems they are not popular. Quote
Moderator Wizcrafts Posted December 31, 2015 Moderator Report Posted December 31, 2015 These machines have a maximum foot lift of 12 mm, which is about 7/16 inches. They use the medium long needle system 328, which is significantly shorter than the system 794 used in the Adler 205 and the 441 type machines. Conversely, the system 328 is somewhat longer than a standard walking foot machine needle (system 135x16 or 135x17). I don't have any 328 or their equivalent 214 needles around, so I can't be more specific. Quote
Members Constabulary Posted December 31, 2015 Members Report Posted December 31, 2015 The 105-64 is an excellent needle feed machine and will serve you well for your sheath projects. The 105 series machines are build like tanks and sill last many decades when well serviced and oiled. Quote
Members Jspool Posted December 31, 2015 Author Members Report Posted December 31, 2015 Thanks, I was just informed it was sold. Still looking, but I think I need a machine that can handle at least 3/4" Quote
Members Constabulary Posted December 31, 2015 Members Report Posted December 31, 2015 (edited) Sorry - I live in the metric part of the world. I have not noticed the 5/8 before - thats approx 1.6cm and probably a bit too much for the 105-64. I think you need a heavier machine. My bad. Edited December 31, 2015 by Constabulary Quote
Kohlrausch Posted December 31, 2015 Report Posted December 31, 2015 Thanks, I was just informed it was sold. Still looking, but I think I need a machine that can handle at least 3/4" I was going to recommend an old Adler 5, but then you upped the ante from 16 to 19 millimetres. My Adler 5 - cost me 180 USD incl. gas - does 20 mm footlift. I guess you will have to redesign either your sheaths or your bank account. Greets Ralf C. Quote
Kohlrausch Posted December 31, 2015 Report Posted December 31, 2015 They use the medium long needle system 328, which is significantly shorter than the system 794 used in the Adler 205 and the 441 type machines. Conversely, the system 328 is somewhat longer than a standard walking foot machine needle (system 135x16 or 135x17). Hi, the 328 are about 52.15 millimetres from shaft to eye. That's about 2.05 inches. Greets Ralf C. Quote
Moderator Wizcrafts Posted December 31, 2015 Moderator Report Posted December 31, 2015 Hi, the 328 are about 52.15 millimetres from shaft to eye. That's about 2.05 inches. Greets Ralf C. Thanks Ralf. My type 794 needles are about 2.75 inches long.. Quote
Members CobblerMichael Posted December 26, 2022 Members Report Posted December 26, 2022 What would be the value of an Adler 105-64? I'm looking to sell mine, but have no clue what it's worth. Thank you Quote
Members shoepatcher Posted December 27, 2022 Members Report Posted December 27, 2022 I would say $1,500.00-$1,800.00US retail. The 205-64 would be worth a little more. These are just ballpark figures. glenn Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.