Members Kd Custom Posted January 3, 2016 Members Report Posted January 3, 2016 I just made a inside waistband holster and not sure why it is coming to a point out at the end. Is there a different way to do the end so it doesn't do this? Thanks! Quote
Members thunter9 Posted January 3, 2016 Members Report Posted January 3, 2016 I don't know , could be you started sewing it together at the top rather than at the point , hey I've been wrong before Quote
Contributing Member JLSleather Posted January 3, 2016 Contributing Member Report Posted January 3, 2016 Looks like you "smooshed" it out by stitching it down. I generally leave holsters open at the bottom, even if it's only a little. Maybe try stitching where the last inch or so is stitched decoratively, then stitch the layers together from there. Quote
Members Kd Custom Posted January 3, 2016 Author Members Report Posted January 3, 2016 I started from the bottom and went up, that is what I was thinking that maybe went to far down. Thanks I'll try that on the next one! Quote
Members rlpullman Posted January 3, 2016 Members Report Posted January 3, 2016 Take a look at the way the cowboy style holsters have a type of v notch at the barrel end of the center fold. Quote
Members dbusarow Posted January 3, 2016 Members Report Posted January 3, 2016 A proper sight channel would probably have solved the problem. Dan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.