panchoskywalker Report post Posted January 25, 2016 Hello, I recently bought these shoes and I realize I would like them to be darken. I have a brown dye that I like a lot which I used to dye this watch strap. How can I apply the dye I like on the shoes? Should I do something to the shoes before applying the dye? Quote Share this post Link to post Share on other sites
venator Report post Posted January 26, 2016 You can but it would be easier and simpler to control if you just buy some kiwi wax in a darker brown colour. A good polish or two and they'll darken right up. If you do try to dye them make sure you clean and deglaze thoroughly as any wax polish will act as a resist. Quote Share this post Link to post Share on other sites
panchoskywalker Report post Posted January 26, 2016 Thanks for your answer, I think I' gonna go with the kiwi wax, but just to know how is the process of deglazing? Quote Share this post Link to post Share on other sites
Nuttish Report post Posted January 27, 2016 (edited) In order to ensure even penetration of whatever treatment you use, you must remove all wax and factory finish. There are so many processes used to finish leather, from various plastics to hard waxes, that you may need to figure out how to remove the coatings on your particular leather. Products like this are a good starting point - http://www.amazon.com/Angelus-Leather-Prepare-Deglazer-Oz/dp/B00EU322DQ Edited January 27, 2016 by Nuttish Quote Share this post Link to post Share on other sites
