Members deloeracustoms Posted January 27, 2016 Members Report Posted January 27, 2016 (edited) I've been building leather holsters now for a while with since success, but I've had so many requests for wallets/cardholders that I can no longer ignore it. What weight leather do you use for a simple, one pocket cardholder? I may do some multipocket stuff,bit mostly would be the layers (at most). I'm thinking 3/4oz would be about right, what does everyone else use? Thanks in advance! Edited January 27, 2016 by deloeracustoms Quote www.deloeracustoms.com www.facebook.com/deloeracustoms
Members Tugadude Posted January 27, 2016 Members Report Posted January 27, 2016 Yes, that is what I use. Could go heavier but when loaded with cards it gets thick pretty quickly. Good luck! Quote
King's X Posted January 27, 2016 Report Posted January 27, 2016 I have gone as far as 4/5 with a light temper, but I would not suggest anything higher no matter what the temper is. Good luck Quote Greetings from Central Texas! The Grain Side Up blog #TheGrainSideUp
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.