Members deloeracustoms Posted January 27, 2016 Members Report Posted January 27, 2016 (edited) I've been building leather holsters now for a while with since success, but I've had so many requests for wallets/cardholders that I can no longer ignore it. What weight leather do you use for a simple, one pocket cardholder? I may do some multipocket stuff,bit mostly would be the layers (at most). I'm thinking 3/4oz would be about right, what does everyone else use? Thanks in advance! Edited January 27, 2016 by deloeracustoms Quote
Members Tugadude Posted January 27, 2016 Members Report Posted January 27, 2016 Yes, that is what I use. Could go heavier but when loaded with cards it gets thick pretty quickly. Good luck! Quote
King's X Posted January 27, 2016 Report Posted January 27, 2016 I have gone as far as 4/5 with a light temper, but I would not suggest anything higher no matter what the temper is. Good luck Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.