Lukitusturva Report post Posted February 16, 2016 Helloy, I bought such a machine , and I need parts , you know how to act what would ?? that part is so badly worn that wobbles Quote Share this post Link to post Share on other sites
Constabulary Report post Posted February 16, 2016 I probably have a shuttle hook and bobbin but I´m not 100% sure if it is the same. Maybe LW member SHOEPATCHER will jump in here - he for sure knows more. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted February 16, 2016 (edited) C, That looks like the right one. Sometimes very hard to tell if that is the correct shuttle. I assume you checked it in the machine by hand? Does the bobbin fit? get me a few more pics of the old one from top, bottom and side view where the tension spring is. I like the machine. You going to restore it? glenn Edited February 16, 2016 by shoepatcher Quote Share this post Link to post Share on other sites
Lukitusturva Report post Posted February 16, 2016 there is a play that the eccentric throw the hook , but it does not take a thread according to . Yeah I like that too from the machine , I do not know how to bring back but at least do it for work, I take pictures when I'm back at the machine Quote Share this post Link to post Share on other sites
Constabulary Report post Posted February 16, 2016 I unfortunately do not have a Colibri Patcher to check it. So we have to count on the Glenns expertise Quote Share this post Link to post Share on other sites
Lukitusturva Report post Posted February 16, 2016 I unfortunately do not have a Colibri Patcher to check it. So we have to count on the Glenns expertise excuse me but whom you mean ?? Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted February 16, 2016 excuse me but whom you mean ?? The member known as ShoePatcher is named Glenn. Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted February 17, 2016 Lukitustura, I need to see more pics of the shuttle hook and bobbin before I can tell you if the Hook that Constabulary has will work. Also, more pics of the machine in general. I have a few of these machines in my garage that will be rebuilt in the future. Seeing the hook and bobbin will tell me more about it. glenn Quote Share this post Link to post Share on other sites
Lukitusturva Report post Posted February 18, 2016 singer is next Quote Share this post Link to post Share on other sites
shoepatcher Report post Posted February 19, 2016 Wow, That is one worn out hook!!!. It has been repaired a number of times so that the original is almost unknown. Any idea on the height and width of the bobbin in mm.? This also could be a hook someone made. It is that rough. glenn Quote Share this post Link to post Share on other sites
