Members piera Posted February 23, 2016 Members Report Posted February 23, 2016 Hello all, I'm attempting to make handbag using red patent vinyl. I sew with Juki 1541s.. i am just testing ons crap before I proceed to my actual bag. My top stitching is fine but my bobbin stitching is loose.. I've tried different combinations of tightening or loosening the bobbin tension or top tension. Im using 69wt nylon bonded thread with size 18 needle Any other suggestions? Thanks so much! Quote
Members Colt W Knight Posted February 23, 2016 Members Report Posted February 23, 2016 Can you post a picture of the bottom and top stitch? I have a feeling I know what's wrong, but want to see what's actually happening first Quote
Members piera Posted February 23, 2016 Author Members Report Posted February 23, 2016 Oops forgot to publish album! Here are the pics! Top Bottom Quote
Members Colt W Knight Posted February 23, 2016 Members Report Posted February 23, 2016 I'very encountered a similar problem on heavy synthetic material. The solution was going up a needle size. That allowed the top thread to pull the bottom thread up into the hole easier and with less top tension when using the smaller needle. What needle point ate you using? Quote
Members piera Posted February 23, 2016 Author Members Report Posted February 23, 2016 Well i did so much testing on it yesterday.. I went from an 18 to A 22 I hadn't interfaced yet.. Once i applied interfacing the stitching came out all around better. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.