makitmama Posted March 4, 2016 Report Posted March 4, 2016 my son-in-law loves the briefcase I made my husband. It is veg tan, custom painted, and finished with beeswax/neatsfoot. It has developed a nice patina. My SIL wants a finish like you see from expensive retailers like Copper River, Saddleback, etc. It is usually referred to as a rustic or distressed finish, and looks sort of like matte nubuck-ish or oil tanned leather. I have a nice side of HO veg tan, and think that veg tan makes a better attache than oil-tan. To make it stiff enough in oil tan, the leather would have to be too thick for my old consew. so- how about feiblings with Bick-4, so that I can put on a less even finish? I have NEVER tried to put on uneven color, and use an airbrush usually. But by hand, I think I can vary the amount of dye in the Bick and get a less even finish. I figure I may need to lightly sand the edges with denim or a dremel to 'distress' them. my question for the group- how do I get such a matte finish? and does anyone have any advice? I showed him some pix of leather pressed onto concrete or rocks, and that was too distressed for him- what he really wants is: http://www.copperriverbags.com/the-bolinas-17-distressed-tan-voyager-laptop-bag-made-in-the-u-s-a-17-v-dis-lap/ Quote
electrathon Posted March 4, 2016 Report Posted March 4, 2016 While veg tan makes a nice stiff as a board case, oil tan looks gorgeous. The feel of it is nicer too and it will look even better as it ages. I would use oil tanned instead of trying to make veg tanned look like oil tanned. Quote
Members Erystawi Posted March 11, 2016 Members Report Posted March 11, 2016 I think I once read the Saddleback uses crometanned? I would use the oiltanned myself, some of those are so beautiful! I've got myself some brown beautifull "plattlær" (kind of oiltanned harnessleather) with beautiful distress and marbelings on, soooo pretty Quote
Members alrabat Posted April 29, 2016 Members Report Posted April 29, 2016 Sorry to bring the topic up this long after the initial post- For what its worth though, Saddleback does in fact use Chrome tanned leather (I think they make it themselves now, but I could be wrong). However, I think oil-tanned is chrome-tanned leather that has been essentially finished again with oil. Not sure about the process exactly, but yeah. I just picked up a side of Springfield Leather's utility side. Its fantastic, and easily comparable to Saddleback's look. I would recommend that if you do order it (and its pretty darn reasonable too, I think I payed 80-100 for the side, off hand), definitely specify a color preference. They'll give you what they have (a downside), but they're pretty good people to work with. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.