Members shadowryder Posted March 19, 2016 Members Report Posted March 19, 2016 (edited) Just finished this one for a friend,standard solo seat for Honda Fury cruiser, fitted gel pad and memory foam internals, cover is 3mm veg tan on top and thick hide upholstery leather on the sides, Put together with Mexican braid, dyed with fieblings spirit dyes,antiqued and finished with diluted then full mix Resoline.. Edited March 19, 2016 by shadowryder Quote http://www.bat-shadow.jigsy.com/http://www.facebook....tShadowLeathers
Members Studio-N Posted March 19, 2016 Members Report Posted March 19, 2016 very nice Quote "Out of my mind.....back in 5 minutes"
Members shadowryder Posted March 19, 2016 Author Members Report Posted March 19, 2016 thankyou.. Quote http://www.bat-shadow.jigsy.com/http://www.facebook....tShadowLeathers
Members Grey Drakkon Posted March 19, 2016 Members Report Posted March 19, 2016 Nice but er, that's a xenomorph, not a Predator. < /nerd > Quote "Everyone with telekinesis, raise my hand!" -Repairman Jack
Members shadowryder Posted March 20, 2016 Author Members Report Posted March 20, 2016 Guy gave me a picture, I used it, He called it a "predator" not being a sci fi nerd ,I do not know, But thanks for your comment on the work.. Quote http://www.bat-shadow.jigsy.com/http://www.facebook....tShadowLeathers
Members brmax Posted March 20, 2016 Members Report Posted March 20, 2016 Looks good, and to me a through time kinda pic background and fits. uh just me, and I'm old The braid is seriously 100++, I need to figure that out! ? any spec on the foam, if you recall appreciate it. later Floyd Quote
Members lessyl Posted March 20, 2016 Members Report Posted March 20, 2016 Very nice! I love the dying job. Being a bike seat, it needs to be fairly water proof. You say you finish it with a diluted then full mix resoline, can you tell me exactly what product you use? As my work requires weather proofing and I'm looking for the best options. Quote
Members shadowryder Posted March 20, 2016 Author Members Report Posted March 20, 2016 Brmax, Hi, thanks for your comments,Braiding comes good with practice my friend,each one I do gets better, The memory foam I used is a 1 inch thick memory foam mattress cover that I bought and cut up as I needed.I cut and shape using an electric carving knife. Lessyl Hi, again thanks for your comments, To finish the seat after colour I used an antiquing paste/polish,on with sponge and off with micro fibre cloth, I then applied 3 coats of Resoline diluted 50/50 allow to dry n buff,then 3 coats @ 70 /30 allow to dry n buff,and finished with 3 or 4 coats of neat resoline buffed up with microfibre cloth when dry. Obviously leather is never 100% w/proof but this makes it water repellant for showers etc, I advise clients to use a waterproofing balsam for general maintainance. Quote http://www.bat-shadow.jigsy.com/http://www.facebook....tShadowLeathers
Members shadowryder Posted March 20, 2016 Author Members Report Posted March 20, 2016 Thanks Toney.. Quote http://www.bat-shadow.jigsy.com/http://www.facebook....tShadowLeathers
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.