CJW306 Report post Posted April 19, 2016 If I was making something similar to this holder with 3-4oz leather, does anyone know what sort of length difference would be required between front and back? I assume that the back needs to be longer than the front, but I wonder if there is an aprox length difference for a rule of thumb or calculation based on leather thickness? Thanks Quote Share this post Link to post Share on other sites
treyman Report post Posted April 19, 2016 My back is 9" and inner is 8.5" Quote Share this post Link to post Share on other sites
NVLeatherWorx Report post Posted April 19, 2016 Half inch is as big a difference as you want to go; I do mine at 3/8" difference (which to me is the opposite end of the equation, no closer). Quote Share this post Link to post Share on other sites
MudBugWill Report post Posted April 22, 2016 I add half an inch for the back as well. Quote Share this post Link to post Share on other sites
dfrensdorff Report post Posted April 23, 2016 1/2" for mine as well Quote Share this post Link to post Share on other sites
CJW306 Report post Posted August 17, 2016 Thanks for the replies, very useful Quote Share this post Link to post Share on other sites
