Need custom leather case for instruments

[Guest Kirk Cormany]

Looking for custom leather cases for 8 and 10 inch tablets. 

[Guest Bigdaddy]

How many?

 

[Guest Kirk]

Hi there

Starting with a few as proofs, then depending on success from a few a month up to 10-20. Potentially could turn into a pretty good sum. I have the master distributorship to North America of some instruments imported from Europe, but one of them needs to be mated to a tablet to work properly.  So the case needs to accommodate the tablet and the small instrument in there rear. 

 

Thanks for the reply,

Kirk

[Guest Kirk Cormany]

You can go to the AdashAmerica.com website and look at the SAB 4404 Data Acquisition Box. This is the unit I'll need to integrate with a standard tablet that will need to mount in the rear, it will be used as a portable data analyzer. There is also some other custom leather case work on the other units I may commission then show at trade shows to see if I get any interest. 

thanks

Kirk

[Guest Kirk Cormany]

To answer your question as to quantity, a few proofs first then could be from a few a month up to 10-20 in foreseeable future. 

[Northmount]

Are you looking for a portable package that will be used for vibration data collection route, or stationary use for vibration analysis at a machine location?  For a data collection route, are you looking at carrying the package on one arm, or on shoulders with tablet in front of your chest.  I have several years experience with vibration data collection routes using various types of data collectors, some integrated with pen tablet PCs.

Will need more information about how you want to integrate the system for easy and safe carry working around operating equipment.  Often in tight locations in close proximity to other machines and moving parts.

PM me and provide your email address so we can discuss the requirements.

Tom

If PM doesn't work for you, go to https://tomscrafts.com/contact  and fill in the contact form.

Photo of a recent project.

[Northmount]

On 2016-07-28 at 8:09 AM, Guest Kirk Cormany said:

Looking for custom leather cases for 8 and 10 inch tablets. 

Are you still looking for someone to do this work, or is this a dead end?

Tom

 

[Guest Kirk Cormany]

Hi Tom

No just been busy.

I will reach out, yes i need to get this done. 

I just need a small holster to integrate accessing the front of a 8 and 10 in tablet with the Adash SAB 4404 unit integrated in the rear behind it but with top available to connect cables. Essentially to turn this unit into a portable 4 channel data collector but with all the benefits of a IP 65 touch screen tablet. 

i have a distributor in Hamilton, ON but none in Calgary BTW.

I am not sure what PM means, but my email is kcormany AT adashamerica DOT com

I will go to your site and contact you through there also.

Thanks in advance,

Kirk

Edited August 21, 2016 by Wizcrafts
Edited email address to stop harvester bots

[Wizcrafts]

 

I am not sure what PM means, but my email is kcormany AT adashamerica DOT com

Thanks in advance,

Kirk

Kirk;

PM = Private Message. This is a sub-system of this forum that allows members to send messages to each other privately, with notifications about new messages showing on top of the logged in user's pages. Since you still have a "Guest" account, you cannot access our PM feature. If you join LWN you will have the use of this and other special features.