adjusting forward and reverse stitch on Consew 206rb3

[Gregg From Keystone Sewing]

 

Gregg thanks for all your help I was able to adjust the stitch length. Up to over       1 1/2" long . I did notice that the needle has to be all the way up when you hit reverse and the stitches will fall in the same hole . Thanks again for all your help .

Thanks for reporting back,glad that worked out.

[Vintsewman]

This question is for Ray100.  Could you please make a copy of your manual or scan it?  I would like to get a copy and have been unable to find one.

Thank you

Steve

[garypl]

On 8/16/2016 at 9:03 AM, Gregg From Keystone Sewing said:

Consew 206RB-3 and -4 are going to have the same exact adjustments for this here, see attached, hope this helps, and yes, the book is certainly confusing with this adjustment as I review.  

Gregg, my machine has these two scribe marks offset by about 1/8” - I tried adjusting so they were aligned and also went the same 1/8” in the opposite direction - still no effect on stitch length.  Did I misunderstand when you stated this is the adjustment to correct stitch length in the 206RB-4?

Thanks!

Gary

[Gregg From Keystone Sewing]

[garypl]

8 hours ago, Gregg From Keystone Sewing said:

Thanks Gregg - so this doesn’t affect stitch length - only needle-feed dog timing.

Gary