Members DJ1935 Posted January 1, 2009 Members Report Posted January 1, 2009 Happy New year to all. Whilst on the subject of Pfaffs. We purchased a 335, grey, cylinder arm model dating from the '60's or '70's. It sews great, goes like a scalded cat and is a brilliant machine. BUT the bobbin only holds enough thread to sew about six feet, if you are lucky! One belt and that's about it. This is extremely frustrating to say the least. Does anyone else have this problem? Is there a modification for these machines? It must have been a real headache in the factory situation, they would have been continually loading and putting in new bobbins. Cheers DJ Quote
Contributing Member barra Posted January 1, 2009 Contributing Member Report Posted January 1, 2009 A couple of things you can do. 1. Get hold of a heap of bobbins and when you wind bobbins, do lots in one hit. 2. If you have at least 2. Get another spool of thread and set it up so that the bobbin is winding as you stitch. When you run out on the machine, swap them over so again as you are stitching you are always winding a new bobbin at the same time. Barra. Quote
Members steveh Posted January 1, 2009 Members Report Posted January 1, 2009 what size thread are you using on your bobbin? If you are using a large thread size it will not hold that much.Try using a smaller thread size. Quote
Members greg gomersall Posted January 1, 2009 Members Report Posted January 1, 2009 you can also buy pre wound bobbins by the box full, never have to wind one just drop a new one in Greg Quote
Moderator Art Posted January 1, 2009 Moderator Report Posted January 1, 2009 Hi DJ, I've used the newer model of that machine with #92 poly thread and it would sew for at least 100 feet or more before running out of bobbin. Sewing only 6 feet means you aren't getting more than 12 feet on the bobbin. That just ain't right. Any chance you have the wrong bobbin and case in there? You're not sewing with 1/8 inch nylon rope are you? I sew #46 and/or #69 and occasionally #92 on my Pfaff 142 and I get plenty of thread on my bobbins and it is from the same era as yours. I don't think any manufacturer would stand for changing bobbins every 6 feet or even 50 feet, it would drive everyone nuts. Art Happy New year to all. Whilst on the subject of Pfaffs. We purchased a 335, grey, cylinder arm model dating from the '60's or '70's. It sews great, goes like a scalded cat and is a brilliant machine. BUT the bobbin only holds enough thread to sew about six feet, if you are lucky! One belt and that's about it. This is extremely frustrating to say the least. Does anyone else have this problem? Is there a modification for these machines? It must have been a real headache in the factory situation, they would have been continually loading and putting in new bobbins.Cheers DJ Quote
Members DJ1935 Posted January 1, 2009 Author Members Report Posted January 1, 2009 Thank you everyone for your replies. I am using Coates Terko #20 thread. The machine came with six bobbins (I can see why!) and everything seems to fit ok. An Upholsterer in town has a new Seiko which has the same size bobbins and he has the same problem, in fact he is so good at changing them he can almost do it without stopping. I find it unbelievable that the makers have developed these machines as "industrial" modern sewers but havent upsized the bobbin capacity. The good old Pearson will sew half a dozen belts and still be looking round for more. With the knowledge we have today why cant the bottom be fed straight from a spool like the top feed? Cheers DJ Quote
Moderator Art Posted January 23, 2009 Moderator Report Posted January 23, 2009 Hi DJ, If you are doing a lockstitch, the bobbin would have to be enormous as it has to run the thread around the more or less stationary bobbin thread. I have seen machines that feed thread like you suggest, but they weren't doing a lockstitch. Art Thank you everyone for your replies. I am using Coates Terko #20 thread. The machine came with six bobbins (I can see why!) and everything seems to fit ok. An Upholsterer in town has a new Seiko which has the same size bobbins and he has the same problem, in fact he is so good at changing them he can almost do it without stopping. I find it unbelievable that the makers have developed these machines as "industrial" modern sewers but havent upsized the bobbin capacity. The good old Pearson will sew half a dozen belts and still be looking round for more. With the knowledge we have today why cant the bottom be fed straight from a spool like the top feed?Cheers DJ Quote
Contributing Member barra Posted January 23, 2009 Contributing Member Report Posted January 23, 2009 It has often been said that the person who can invent that capability will be richer than Bill Gates. Barra Quote
Members DJ1935 Posted January 25, 2009 Author Members Report Posted January 25, 2009 Bill Gates aye? I'm off to the shed ............... I may be some time! Thank you for explaining about that guys. DJ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.