Jump to content

Recommended Posts

  • Members
Posted

Hello all, new here and am looking for a machine to sew axe masks (sheaths). I am working with 6-7oz veg tan, three layers thick, completely flat. My reason for this machine is that I am currently using an EZ awl sewing awl and am tired of poking my fingers!! I am not doing this for profit, just as a hobby for my own axe collection which is growing daily. That being said, I am not ready to jump into a cowboy 3200 for a couple masks per month. I dont think this would the best investment for me at this time. Later yes, but now, no. Dad has a 29K69 and it just wont do what I want, due to excessive stitch length with my thick material. I am getting over 20stitches per inch. I know I could rebuild the singer but read here that this machine will never give me the results I want. Which sucks cause I really like this machine! Obviously funds are very limited or I would just go to Toledo and pick up a cowboy!!

So, I did some searching here and found that the crude chinese patcher may do what I want. heavy thread and 5 stitches per inch on 1/4" or a little more veg tan tooling leather. A couple sheaths per month tops.

Does anyone have any experience using these machines for 20oz thickness. I know the machines need much tweaking and mods to work properly and I am willing to work out any bugs necessary. I have a mill, a lathe and Dad is a very competent sewing machine mechanic.

Second question, I thought  I read there is a small and large version of this machine. If this is true, can someone tell me how I can tell the difference in the two?

It looks like the Tippman Boss would be perfect for my needs but for the money, I can get a cowboy!! And again funds are limited. I can always keep poking myself and buy a gross of bandaids but would rather have a machine...

Thanks in advance for all help offered, Bubba the Axe Man

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted (edited)

Learn to saddle stitch. Far, far better than an EZ awl and the stitches are so much nicer, In addition, in terms of pure quality and craftsmanship, saddle stitching is absolutely the top of the pile. There isn't much sewing in an axe mask which makes it a perfect candidate for a real saddle stitch. Most people who use machines accept taking a step down in quality in exchange for convenience, speed and cost efficiency - that only works out if you are doing a LOT of sewing.

You should at least try it before investing in a machine. It takes some practice to do it reasonably well, but it's not rocket science.

Edited by Martyn
  • Moderator
Posted

Our member, Darren Brosowski is the official dealer for the "Able" brand of Chinese patchers in the Northern and Southern Hemispheres on this side of the Atlantic Ocean. When he sees this topic he may reply about the ability of his machines to sew 20 or 21 ounces ounces of veg tan leather at 5 stitches per inch or better. He may be "able" - pardon the pun - to set one up specifically to do this for you.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

20stitches per inch!!! stay in the 5-7 realm.  Makes things look neat and professional.  I'd be afraid 20 would just perforate the leather.

  • Members
Posted (edited)
2 hours ago, cowboycolonel said:

20stitches per inch!!! stay in the 5-7 realm.  Makes things look neat and professional.  I'd be afraid 20 would just perforate the leather.

Yep, that was on a piece of scrap. It was UGLY. That is why I wont consider a machine that wont do 5spi on 20oz total of veg tan.

Martyn, I plan to two needle saddle stitch my next sheath and put away the awl.

Wiz, thanks for this information. I thought Darren was from down under! Glad to know we have someone on this side of the pond. 

To be quite honest, the reason I want a machine, besides the bloodletting, is that when I punch my stitch holes with my 4prong diamond punch, the holes (backside) dont always land in my groove!! It makes the whole project disappointing. If it wouldnt cause divorce, I would just go to Toledo and pick up a cowboy 32 or 3500 machine and call it done.

I was hoping to hear from someone that uses this machine to tell me if I am asking too much of it... From what Wiz stated above, it sounds possible if set up correctly. Plus this crude machine is really my style and I love a good challenge.

Thanks again, Bubba

Edited by Axeman
  • Moderator
Posted
2 hours ago, Axeman said:

Wiz, thanks for this information. I thought Darren was from down under! Glad to know we have someone on this side of the pond. 

Thanks again, Bubba

He is. Darren is in Australia.

Posted IMHO, by Wiz

My current crop of sewing machines:

Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.

  • Members
Posted

Axeman, there have been a couple of threads about these Chinese machines. The larger one sounds like the one you'll need as the smaller one is best with #69 thread (it may handle #138, although the bobbin is very small so won't hold much of that thread!). Darren is certainly the one who can best advise on these wee beasties.

As Martyn said, you can't beat a good saddle stitch, which is how I still do my holsters. Have you tried punching the holes before grooving the back? That way you may be able to tweak the groove to line up with the holes. The other thing you could try is using the machine you have to punch the holes in the leather first (no thread, just the needle). I do this with some of my hand stitching as it gives a nice even spacing and makes it much easier to get the awl through when saddle stitching. Without thread loading the machine down they can punch through leather fairly easily.

Machines wot I have - Singer 51W59; Singer 331K4; Seiko STH-8BLD; Pfaff 335; CB4500.

Chinese shoe patcher; Singer 201K (old hand crank)

  • Members
Posted

Axeman, I've just bought a Chinese Leather Patcher and I don't believe you are going to get 20 oz. of leather going through that machine!

Bob's Leatherworks has a video up on youtube with a leather patcher. He does saddles and holsters. I called him after seeing his youtube video and asked him about the thickness of the leather in his video and what size needle he was using.

He said, 2 peices of 4/5 leather with a 22/140 needle.

And at that size needle, if you can find an alternative, you'll be using from #69 to #138 thread.

Now, the Leather Patcher I got off of Ebay, is a 15x1 needle system. That's a HOME needle system with a flat shank. They don't make 22/140 size leather needles for a 15x1 needle system anymore!!!

I've contacted all of the needle companies and they say there's no way to get them because there wasn't enough demand and they don't make them.

I've managed to get some 22/140 sharps, but not the leather needle. Which would work on soft thick leather like suede.

I've been checking out some other needle systems to see what I can exchange. The needle system is going to have to match up with not only the needle length, but the depth from the top of the shank to the eye. Otherwise that needle isn't going to pick up the bobbin thread. And then, you've also got to make sure that the daggone thing won't crash into the innards of the bobbin casing or it will damage your machine.

No, if you are doing something that thick, I think you are going to need an Industrial machine with a motor.

 

  • Members
Posted

Hi Axeman,

The answer is........ not really.

20oz is about 8mm and that is way more than any patcher can do! There are five different patchers from China starting with the basic one that will do everything a 29k will do, three bigger versions of this machine up to the Chinese 29k variant.

The basic model will, depending on the individual machine, punch through 14oz all day long. Generally the Chinese 29k is limited to 10oz but someone like Bob Kovar at Toledo can probably make it sew through thicker material.

Then there are the other three machines that use the same system of cam driven arms as the 1860's Wertheim machines. They are bigger, heavier and use bigger needles BUT they are not designed for heavy leather. There are many limitations as they are designed to sew through thick soft material.

Save your pennies and buy a CB2500 at the absolute minimum.

 

 

 

 

  • Members
Posted
1 hour ago, HobbledCobbler said:

Axeman, I've just bought a Chinese Leather Patcher and I don't believe you are going to get 20 oz. of leather going through that machine!

Bob's Leatherworks has a video up on youtube with a leather patcher. He does saddles and holsters. I called him after seeing his youtube video and asked him about the thickness of the leather in his video and what size needle he was using.

He said, 2 peices of 4/5 leather with a 22/140 needle.

And at that size needle, if you can find an alternative, you'll be using from #69 to #138 thread.

Now, the Leather Patcher I got off of Ebay, is a 15x1 needle system. That's a HOME needle system with a flat shank. They don't make 22/140 size leather needles for a 15x1 needle system anymore!!!

I've contacted all of the needle companies and they say there's no way to get them because there wasn't enough demand and they don't make them.

I've managed to get some 22/140 sharps, but not the leather needle. Which would work on soft thick leather like suede.

I've been checking out some other needle systems to see what I can exchange. The needle system is going to have to match up with not only the needle length, but the depth from the top of the shank to the eye. Otherwise that needle isn't going to pick up the bobbin thread. And then, you've also got to make sure that the daggone thing won't crash into the innards of the bobbin casing or it will damage your machine.

No, if you are doing something that thick, I think you are going to need an Industrial machine with a motor.

 

Leather point needles are available in 21/130 which at hand crank speed is more than enough for 138/M20 thread. Some of my 29k customers use the 21/130 needles for 138/M20 in their 29k patchers.

If you asked I would tell you that the bed of the Chinese patchers is adjustable and you could use the 134 class needle which is readily available in 22/140 leather point. Needle length is the same so no need to adjust the timing.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...