Contributing Member JLSleather Posted December 18, 2016 Contributing Member Report Posted December 18, 2016 I'll be selling some things here after the 'break'.... from dyes / finishes to chrome tanned leathers to hand tools. And machine needles and threads. And the stand up drill press, if picking it up. Basically, I'm keeping the stitching machine, the tooling 'stuff', the 'dummy guns'... and most the rest kin git gone Just a 'heads up' at this point, buy FYI I'm looking to downsize and help the next guy a bit -- but not looking to dump a bunch of stuff at 10¢ on teh dollar (some folks see "for sale" and get ignorant). Oh, I do have one of those sewing edge guides, used about twice (or was is 7 times, whatever), I'd take $50 for. I replaced it with a drop-down guide. Came off a Cobra 4 machine, ... "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
bikermutt07 Posted December 19, 2016 Report Posted December 19, 2016 Keep us posted. I'm not paying 80 bucks for a belt!!! It's a strip of leather. How hard could it be? 4 years and 3 grand later.... I have a belt I can finally live with. Stitching is like gravy, it's only great if you make it every day. From Texas but in Bossier City, Louisiana.
Members OLDNSLOW Posted December 19, 2016 Members Report Posted December 19, 2016 did you have to drill and tap to make the drop down work? been thinking about it but the holes aren't the same so real curious . Thx
Contributing Member JLSleather Posted December 19, 2016 Author Contributing Member Report Posted December 19, 2016 What holes aren't the same as what? Are there two 6mm holes in the back of yours? "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members OLDNSLOW Posted December 19, 2016 Members Report Posted December 19, 2016 I have the cobra 4 as well, but I thought that the drop down roller guide had vertical and the machine has horizontal or visee versee something like that.
Members OLDNSLOW Posted December 19, 2016 Members Report Posted December 19, 2016 never mind I did some searching and found ( YOUR UTUBE ) videos!!! And saw what you did I just hope Uwe will have the stuff at the 1st of the month when I can order them.
Contributing Member JLSleather Posted December 19, 2016 Author Contributing Member Report Posted December 19, 2016 On 12/19/2016 at 8:05 AM, OLDNSLOW said: I just hope Uwe will have the stuff at the 1st of the month Expand Yeah, just one more "plug" for that guy (next time I send a bill ). Fast, friendly service and a product exactly as he described it. Install painlessly. "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members OLDNSLOW Posted December 19, 2016 Members Report Posted December 19, 2016 I'll let you add it to my bill.
Recommended Posts