Ambassador pete Posted January 28, 2017 Ambassador Report Posted January 28, 2017 When dying a project, how many of you dilute the die and approximately by how much? I've always used it straight out of the bottle but have started deleting with alcohol 50-50. All comments are most welcomed. Quote
Members OLDNSLOW Posted January 28, 2017 Members Report Posted January 28, 2017 I mix mine to about 50/50 using denatured alcohol, I haven't cut it any further as the 50/50 works fine. Quote
cardinal leather Posted January 29, 2017 Report Posted January 29, 2017 I tend to use the dye straight out of the bottle. paint is thinned when used. Quote
Members TomG Posted January 29, 2017 Members Report Posted January 29, 2017 There is a 2 page thread about dip dying at the link below. It goes into lots of detail about different techniques and ideas. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.