Ambassador pete Posted January 28, 2017 Ambassador Report Posted January 28, 2017 When dying a project, how many of you dilute the die and approximately by how much? I've always used it straight out of the bottle but have started deleting with alcohol 50-50. All comments are most welcomed. Quote
Members OLDNSLOW Posted January 28, 2017 Members Report Posted January 28, 2017 I mix mine to about 50/50 using denatured alcohol, I haven't cut it any further as the 50/50 works fine. Quote
cardinal leather Posted January 29, 2017 Report Posted January 29, 2017 I tend to use the dye straight out of the bottle. paint is thinned when used. Quote
Members TomG Posted January 29, 2017 Members Report Posted January 29, 2017 There is a 2 page thread about dip dying at the link below. It goes into lots of detail about different techniques and ideas. Quote Tom Gregory Legacy Leathercraft www.legacyleathercraft.com www.etsy.com/shop/legacyleathercraft
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.