Dart Carrying Case

[fredk]

Very excellent work so it is

A thought about the elastic; what about using thin-ish belly leather. I find it has enough stretch in it to be slightly elastic and will conform to various diameters.

I used some as a pen holding loop on somat, it was stretchy enough to accommodate a few diameters of pen sizes

I only use velcro on the cheap throw-away items made up from scrap. For my regular items its not allowed, has to be a proper closure fitting.

[Bob Blea]

16 hours ago, fredk said:

Very excellent work so it is

A thought about the elastic; what about using thin-ish belly leather. I find it has enough stretch in it to be slightly elastic and will conform to various diameters.

I used some as a pen holding loop on somat, it was stretchy enough to accommodate a few diameters of pen sizes

I only use velcro on the cheap throw-away items made up from scrap. For my regular items its not allowed, has to be a proper closure fitting.

Thanks for the suggestion fredk, hadn't thought of trying a stretchy leather like that.  I'll give that a shot.  I agree about the Velcro.

[TheCyberwolfe]

I would just assume that the darts would always have a tip attached, and make that bottom pocket enclosed. Make loops like on a gun belt for the barrels, and then have a flap that lays over the top sort of like you do with a tool roll. The other option would be to build it with the hinge at the top rather than the side, similar to this screwdriver case I made.

[Bob Blea]

On ‎2‎/‎18‎/‎2017 at 10:16 AM, TheCyberwolfe said:

I would just assume that the darts would always have a tip attached, and make that bottom pocket enclosed. Make loops like on a gun belt for the barrels, and then have a flap that lays over the top sort of like you do with a tool roll. The other option would be to build it with the hinge at the top rather than the side, similar to this screwdriver case I made.

 

I like that design Cyberwolf.  If I make another one I will probably go more that with that style.