Moderator Wizcrafts Posted September 5, 2024 Moderator Report Posted September 5, 2024 10 hours ago, mjskier said: That spring and screw affect the inside alternating/vibrating foot. Oops, I should have left it alone. How do I know how far to screw it down? I haven't seen it mentioned in the service manual I found online. That spring pushes down on the inside foot, which pushes down on the material under it. Under that is the feed dog with its hole or slot for the needle. If you get prominent pock marks on the bottom from the hole in the feed dog, back off that top screw and let the main pressure spring on the back exert most of the foot pressure. I've attached a manual for the Singer 111w155 and 156 that shows the various views of the parts, including the rear pressure spring. It also contains valuable usage details. 111W156.pdf111W152_W153_W154_W155.pdf Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members mjskier Posted September 5, 2024 Members Report Posted September 5, 2024 Thank you so much! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.