Members Sanch Posted April 5, 2017 Members Report Posted April 5, 2017 Okay so here's my final attempt I don't think I'll be spending any more time trying to make these things I would say that this last attempt is passable the holes look good I ran some stitches through it as you can see they came out pretty good but after having tried a couple of times now I think I will just save some pennies and buy some or stick to my stitching awl. So if I am counting this correctly I ended up with 6 SPI which for me is fairly good. Anyway here are the end results the two prong is not quite up to par but I enjoyed having fun making Sparks. first pic is in process of making them the bolts is there for size reference. and here are some shots of the holes that they produce and a close up and a shot of the stitching. I did not catch the thread when I ran that Stitch. Quote
Members Mattsbagger Posted April 6, 2017 Members Report Posted April 6, 2017 Looks pretty good to me. How is the back side? Quote
Members Sanch Posted April 6, 2017 Author Members Report Posted April 6, 2017 (edited) 9 minutes ago, Mattsbagger said: Looks pretty good to me. How is the back side? The backside doesn't look bad at all considering that I did test it on an old 2x4 Edited April 6, 2017 by Sanch Quote
Members Bodean Posted April 6, 2017 Members Report Posted April 6, 2017 Looks like a winner to me. Quote
Members Sanch Posted April 6, 2017 Author Members Report Posted April 6, 2017 13 minutes ago, Bodean said: Looks like a winner to me. yup thanks Quote
Members William Bloke Posted April 6, 2017 Members Report Posted April 6, 2017 Looks like they make a nice consistent patten, and the steel looks chunky enough to hold up to a lot of use. Good job! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.