Evo160K Report post Posted May 25, 2018 It's pretty amazing, cost $63.13 delivered in 1996. Quote Share this post Link to post Share on other sites
suzelle Report post Posted May 28, 2018 (edited) On 5/3/2017 at 4:05 AM, trash treasure said: Get a set of Chapman gunsmith screwdrivers - Wouldn't be without them : https://chapmanmfg.com/collections/slotted-flathead-sets/products/8900-standard-set-12-slotted-bits This Chapman set comes in pink! Thanks for mentioning it! Edited May 28, 2018 by suzelle Quote Share this post Link to post Share on other sites
chrisash Report post Posted May 28, 2018 Regardless of the make, only use either parallel flat head or slightly hollowed out flat heads which have a parallel tip and then a slight hollowed out area. They fit the screws properly and put all the turning power onto the whole blade that's in the screw Normal spanners are shaped with slopping sides going into a parallel sided screw hole so as you turn only one tiny part takes all the power Quote Share this post Link to post Share on other sites