Contributing Member JLSleather Posted June 2, 2017 Contributing Member Report Posted June 2, 2017 (edited) Anybody got a couple sets you can let go of? 2, or 10, whatever. Paypal is fine, but i want 'em mailed. No patience for some "company" to take my money on Friday and not ship anything 'til middle of next week or later. Need the t-nut, spacer, washer and screw.... for full size automatic holster. Whatcha got? LONG AS I'M AT IT ... I could use a few belt clips, too. Something in the 1.25" wide range. Edited June 2, 2017 by JLSleather "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members OLDNSLOW Posted June 2, 2017 Members Report Posted June 2, 2017 I have the belt clips in both the short and long version, cut and paste a pic of the screw set up I might kin throw sumpthin together.
Contributing Member JLSleather Posted June 2, 2017 Author Contributing Member Report Posted June 2, 2017 You got clips inch anna quarter wide? Not like 1 1/4" belt, but fit 1 1/2 or 1 3/4" belt and the CLIP is 1 1/4" wide? have to hunt a minute for the parts in one pic.. never occured to me to take a pic of them "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Contributing Member JLSleather Posted June 2, 2017 Author Contributing Member Report Posted June 2, 2017 (edited) I mean this.. don't matter if teh screws are #6 or #8, long as they aint 1/4" and they're about 3/4" long. So teh spacers would need to be about 3/4" (though I can cut those if that's a problem), and the t-nuts match 6-32 or 8-32. Washers 'n' flatheads, don't matter if they're black or stainless . Edited June 2, 2017 by JLSleather "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members wayner Posted June 3, 2017 Members Report Posted June 3, 2017 (edited) Jeff i can hook you up with 6-32 x 1/4" 3 prong t nuts screws and washers just send me a e mail Edited June 3, 2017 by wayner
Contributing Member JLSleather Posted June 3, 2017 Author Contributing Member Report Posted June 3, 2017 Sent. Some of these suppliers out of control -- ordered shark 5/23, got a "tracking number" the same day, found out that number was wrong only after contacting THEM 9 days later... and now shows delivery perhaps Monday ... "Observation is 9/10 of the law." IF what you do is something that ANYBODY can do, then don't be surprised when ANYBODY does.
Members OLDNSLOW Posted June 3, 2017 Members Report Posted June 3, 2017 I cant get out to the garage till tomorrow this knee really got me in a bad way, But not sure you know but all those are available at Lowes or Home Depot In black or chrome, Ill check back with boards in the morning if y'all need sumthin.
Recommended Posts