kschmadeka Report post Posted August 7, 2017 (edited) I've just got my new gun mold site up and running, you can see it at: www.kevinsgunmolds.com For a while I've been selling white plastic gun molds that were not the best. They worked, though the plastic wasn't the best for this purpose, it was just what I was using for other purposes and had on hand. I've started using Polytek 15-3, a dense and durable slow-cure mineral filled plastic with some of the lowest shrinkage there is. A vacuum degassing chamber is used to keep bubbles to a minimum. I've also improved my mold-making skills and now can offer quality gun molds. The amount of time required to make these is a lot greater but I'm keeping the price to $35 each. If you buy three you get one free, just tell me which one you want. My model line is limited right now because I'm remaking a lot of my old molds. Below is a list of what's currently available. If you need one that's not on this list you can ask to be notified. Most all of what I make is in the pocket gun category, because that's what I make holsters for. Every model with a trigger guard is available filled or unfilled. Guns with thin trigger guards have the guards thickened on the inside, in a way that you can easily dremel out the thickening if your application requires it. Kevin Schmadeka www.kevinsconcealment.com www.kevinsgunmolds.com Beretta 21A Beretta 3032 Cobra Standard Cobra Big Bore Cobra Long Bore DB9 DB9 CTL G42 G42 CTLR G42 CTLG G42 ARMA TR5 G43 G43 CTLG G43 CTLR G43 ARMA TR5 G17/22 G19/23 NAA 22LLR NAA PUG NAA 22M NAA Sidewinder Phoenix HP22 Ruger LCP Ruger LCP DS122 Ruger LCP Vir R5 Seecamp Taurus TCP Taurus TCP CTL Edited August 7, 2017 by kschmadeka Share this post Link to post Share on other sites
CaptQuirk Report post Posted August 7, 2017 Could be cool, the price is really attractive. Got some revolver pics to share? Share this post Link to post Share on other sites
kschmadeka Report post Posted August 7, 2017 5 hours ago, CaptQuirk said: Could be cool, the price is really attractive. Got some revolver pics to share? The only revolvers I have are the NAA .22 revolvers. I'll get some pics taken soon. Share this post Link to post Share on other sites
Rohn Report post Posted October 9, 2018 Nice site and nice prices. I'll be keeping you in mind. I am interested in some larger revolver copies like - S&W 629, S&W 500, Ruger Red Hawk. I'll be signing up for your notification of new molds that you start to do. Share this post Link to post Share on other sites
kschmadeka Report post Posted September 2, 2019 UPDATE ON DUMMY GUNS I no longer have the site at kevinsgunmolds.com but have now put them all in a listing on my regular holster site. You can now find these at: https://www.kevinsconcealment.com/products/holster-molds Lots of new models that no one else has and I'm now using the same plastic as Cook's Gun Molds. If they don't start selling more I might be dropping this side business though. Share this post Link to post Share on other sites
JLSleather Report post Posted September 9, 2019 The question I would have is more about dimensional accuracy than "purdy" shapes and colors. They don't seem to be in any particular order. Share this post Link to post Share on other sites
kschmadeka Report post Posted April 15, 2021 I just added a mold for the Colt 1908 Vest Pocket. Holsters for this gun sell a lot better than I expected them to. There's some other new molds too since last posting. https://www.kevinsconcealment.com/products/holster-molds Share this post Link to post Share on other sites
