Alexis1234 Report post Posted August 26, 2017 (edited) I purchased a Landis 1 over the winter.... this forum has been a HUGE help in getting it up and running. I had work done on the shuttle, etc. It will now sew a consistently nice stitch.The last issue I seem to be having, is it will not sew a straight stitch. The machine wants to walk the leather off the right side unless I guide it( and I've been making stitch grooves as a guide)My fingers are too close to the needle for comfort lol. I made sure the feet and needle are aligned. Any one know what I could do to fix this? I really like the machine otherwise, and have been using it almost daily. Thanks for any input. Edited August 26, 2017 by Alexis1234 Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted August 28, 2017 You could get some dirt under the feed dog causing it to tilt? Also check that it isn't bent.How about the top pressure foot does it come down straight? Quote Share this post Link to post Share on other sites
pcox Report post Posted August 30, 2017 Does you feed dog still have the points on it & is the stitch length set to the same length as the points? Quote Share this post Link to post Share on other sites
