Members davidhebert22 Posted September 8, 2017 Members Report Posted September 8, 2017 I'm looking to make a sholder harness to Hold two, two way radios. I've searched a few places with no luck. Any help would be appreciated. Quote
Members Dwight Posted September 9, 2017 Members Report Posted September 9, 2017 Exactly where on the harness do you want to carry the radios? Front, . . . where your shirt pockets are? Under each arm? Behind your back? How big are they? Lots of information needed to be able to help you. May God bless, Dwight Quote
Members SunLynx Posted September 9, 2017 Members Report Posted September 9, 2017 I can make a suggestion, but I don't know if it will do you any good. Could be a place to start though. I prefer to wear my phone on my person, but as I used to work retail I wasn't technically allowed to do so while working/"on the floor". So I made a simple figure-8 harness with a screwed on strap to keep the holster in it's preferred location directly under my arm. Because of my physical appearance unless my polo shirt pulled wrong you couldn't even tell I had it. To follow on that thought, and also @Dwight's thoughts, you might want to try a standard shoulder harness, but use a thinner strap at a specific location to keep it in place. Also consider the "profile" of your radios. I have the holster for my cell phone turned in such a way that it's tucked in to my arm pit pretty well, but that required some consideration to the direction I wanted it to face and how best to keep the profile from catching on everything or feeling really loose. Quote
Members davidhebert22 Posted September 9, 2017 Author Members Report Posted September 9, 2017 Something like this picture. I just don't really know where to start. I was able to get a bullseye double sholder harness for pistols ordered from tandy to use as a starting point. The radios would be like 3in wide by 5in tall and 2in deep. Quote
Members Dwight Posted September 9, 2017 Members Report Posted September 9, 2017 9 hours ago, davidhebert22 said: Something like this picture. I just don't really know where to start. I was able to get a bullseye double sholder harness for pistols ordered from tandy to use as a starting point. The radios would be like 3in wide by 5in tall and 2in deep. OK, . . . now we can do something. I make a shoulder holster that is worn so it points the muzzle down, . . . and is a re-work of an older design. It, I think, would be perfect for this application. The next problem will be getting the pattern to you. If you want, . . . send me a private message, . . . use the little envelope up in the top right hand corner, . . . and I'll see if I can't make a workable copy for you and mail it to you. The shoulder straps will simply go from the front of one to the rear of the other, . . . and the whole thing will have belt clips, . . . one on each side, . . . as does the one in the picture. It does not have the "H" harness in the back, . . . but rather a simple "X" where the two shoulder straps cross, . . . Let me know if you are interested. May God bless, Dwight Quote
Members davidhebert22 Posted September 9, 2017 Author Members Report Posted September 9, 2017 4 hours ago, Dwight said: OK, . . . now we can do something. I make a shoulder holster that is worn so it points the muzzle down, . . . and is a re-work of an older design. It, I think, would be perfect for this application. The next problem will be getting the pattern to you. If you want, . . . send me a private message, . . . use the little envelope up in the top right hand corner, . . . and I'll see if I can't make a workable copy for you and mail it to you. The shoulder straps will simply go from the front of one to the rear of the other, . . . and the whole thing will have belt clips, . . . one on each side, . . . as does the one in the picture. It does not have the "H" harness in the back, . . . but rather a simple "X" where the two shoulder straps cross, . . . Let me know if you are interested. May God bless, Dwight That would be awesome. Thank you so much. Quote
Members Shawn6620 Posted May 2, 2018 Members Report Posted May 2, 2018 Would love a copy myself if y’all worked one out. I have a double and a single to make Quote
Members Dwight Posted May 2, 2018 Members Report Posted May 2, 2018 Davidhebert, . . . did you ever send me your email address? I looked and could not find where I sent you a pattern, . . . suspecting I never got your email address. If you never got the pattern, . . . email me at ciminodw@gmail.com May God bless, Dwight Quote
Members Shawn6620 Posted May 4, 2018 Members Report Posted May 4, 2018 (edited) Looking to build the same, be great if you could hook me up as welL shawn6620@outlook.com Edited May 4, 2018 by Shawn6620 Spelling Quote
Members WhiteyT Posted September 21, 2018 Members Report Posted September 21, 2018 I make a couple per week, but its all in my head Quote
Rockoboy Posted September 22, 2018 Report Posted September 22, 2018 On 21/09/2018 at 5:03 PM, WhiteyT said: its all in my head Man, your head is a busy place, and maybe a little mixed up! Quote
Members WhiteyT Posted September 22, 2018 Members Report Posted September 22, 2018 Prolly...not a LSU FAN tho, that went to a customer Quote
Members WhiteyT Posted September 23, 2018 Members Report Posted September 23, 2018 Here's a couple more Quote
Members MarkCdub Posted December 8, 2019 Members Report Posted December 8, 2019 I know this is an old topic, but what weight leather did you use for the straps and holsters WhiteyT? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.