Members Dragonfly42 Posted September 14, 2017 Members Report Posted September 14, 2017 This was a bit trickier than I anticipated but project #3 finally complete (most of my other stuff I'm still stuck on) Quote
Members SunLynx Posted September 14, 2017 Members Report Posted September 14, 2017 Nice work Dragonfly! I would imagine the 2 turquoise pieces are decorative rivets, and the agate is a flat dyed focal piece? Did you shape/mould the leather piece holding the agate? Quote
Members Dragonfly42 Posted September 14, 2017 Author Members Report Posted September 14, 2017 6 hours ago, SunLynx said: Nice work Dragonfly! I would imagine the 2 turquoise pieces are decorative rivets, and the agate is a flat dyed focal piece? Did you shape/mould the leather piece holding the agate? Thank you! That's correct the rivers are just there for looks. The agate is a slice I got off eBay . I did a little bit of wet forming but not a lot. The window is about 1/8 inch smaller than the slice itself Quote
Members SunLynx Posted September 14, 2017 Members Report Posted September 14, 2017 Do you think that the dark background behind the agate is just as good as if you had left it undyed/light behind the agate? Quote
Members Dragonfly42 Posted September 14, 2017 Author Members Report Posted September 14, 2017 10 minutes ago, SunLynx said: Do you think that the dark background behind the agate is just as good as if you had left it undyed/light behind the agate? That particular one was pretty solid so it wouldn't matter much. Some of the others it would depend on the color I think. I've contemplated even painting white or silver on the translucent ones to make it show more Quote
Members kiwican Posted September 14, 2017 Members Report Posted September 14, 2017 Very nice. Did you cement the agate in place as well? Quote
Members Dragonfly42 Posted September 14, 2017 Author Members Report Posted September 14, 2017 2 hours ago, kiwican said: Very nice. Did you cement the agate in place as well? I tried but it didn't want to stick. The overlay is enough to hold it in place thankfully. Gotta rethink before I do another. Was contemplating drilling and stitching the agate on the edges then overlay Quote
Members SunLynx Posted September 14, 2017 Members Report Posted September 14, 2017 1 hour ago, Dragonfly42 said: I tried but it didn't want to stick. The overlay is enough to hold it in place thankfully. Gotta rethink before I do another. Was contemplating drilling and stitching the agate on the edges then overlay Which glue did you use? I've had good luck with E-6000, but no glue is perfect. Quote
Members Dragonfly42 Posted September 15, 2017 Author Members Report Posted September 15, 2017 38 minutes ago, SunLynx said: Which glue did you use? I've had good luck with E-6000, but no glue is perfect. Tanners bond contact cement Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.