Members DavidMillsSaddlery Posted December 6, 2017 Members Report Posted December 6, 2017 http://www.youtube.com/watch?v=dPExZiLaNFw i was messing with this today, and this popped off? Any 97 owners out there? Can you look at your machine and take pictures so I can have a reference to go by? thanks! Quote
CowboyBob Posted December 6, 2017 Report Posted December 6, 2017 Do not tighten the screw,also don't oil this area where the grooves are.The piece w/a screw in it is supposed to grip the shaft when the plunger pushes the arm up.So put the spring on top of the arm & if there's no oil on the shafy iy should pinch the shaft & lift the foot when it's supposed to,if not then tighten the screw just a little until it grips & lifts the shaft. Quote
Members DavidMillsSaddlery Posted February 27, 2018 Author Members Report Posted February 27, 2018 Thanks Bob! I just saw this! I guess I’m not getting email notifications on here? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.