RobC01 Report post Posted December 12, 2017 This piece has a really nice finish that I'd like to duplicate. I haven't done any antiquing before but I've read some notes on here. I'm a little confused about how to get the look if I've already dyed/painted with Acrylic (Angelus)? Do I still need to resist, or does acrylic do that for me? Any guesses on the products? Fiebrings and Tan-Kote? Quote Share this post Link to post Share on other sites
Bodean Report post Posted December 12, 2017 (edited) In my experience antiquing over paint works without resist. It will age some colors, like white, better than others. It depends on what look I am after as to what I do with the antique gel or paste. I also use Angelus a lot on my pieces. Edited December 12, 2017 by Bodean Quote Share this post Link to post Share on other sites
RobC01 Report post Posted December 12, 2017 33 minutes ago, Bodean said: In my experience antiquing over paint works without resist. It will age some colors, like white, better than others. It depends on what look I am after as to what I do with the antique gel or paste. I also use Angelus a lot on my pieces. Wow, really nice details! I wish I had better hand-eye coordination and craftsmanship. Quote Share this post Link to post Share on other sites
Bob Blea Report post Posted December 12, 2017 I use Liquitex acrylics and Tandy Eco-Flo antiques. I have on occasion had some of the paint rub off on high points, maybe from my own rubbing action when wiping off the antique. I like to put a layer of a clear acrylic finish over the painting to seal and protect it before antiqing. With a lacquer based resist (like Neat Lac/Clear Lac/Wyosheen) the solvent can easily dissolve the acrylic so I don't recommend using those over acrylic paints. Quote Share this post Link to post Share on other sites
RobC01 Report post Posted December 12, 2017 I appreciate the tips Bob! Thanks! Quote Share this post Link to post Share on other sites