Anyone in North GA (cumming area) need a free stitching clam??

[Sledzep01]

So I have a bunch of wood. I just made a stitching clam (Pics below, not great but it will work) I already have wood cut for another and enough to make at least 4 more kike it.

I also want to make 4 (1 for me) stand up clams also. Literally standing on the floor 4ft tall out of 2x6x8 cedar boards.

Free wood, a saw, a drill, and router to you... Help for me. I even have a few hinges if you are not particular.

Win Win

I am tired of drilling an screwing everything to my table to hold it still.

Anyone up for a Pony Party?

You bring the bolts & HW,  I used a 5 and 6 inch in these pics.

Here is a thread with ideas I had, and here is what I made.

PM me or respond here. No staining involved this way we are done in 1 day.

http://leatherworker.net/forum/topic/78885-time-to-replace-the-shetland-ponyfoal/

 

[bikermutt07]

Those should work good for you. You may want to glue a little triangle right below the bolt. It will keep the thread from snagging on it.

[Sledzep01]

43 minutes ago, bikermutt07 said:

Those should work good for you. You may want to glue a little triangle right below the bolt. It will keep the thread from snagging on it.

I was hoping to hang a flap of leather over it with one of those... Grrr, cant remember... too lazy to look it up.

Let's call it a Tom Jones rivet? you know where it is like a knob that gets screwed on and the leather hole snaps over it...

Like a Chicago Screw. Searching now and still cannot find the name.

Whew, I know it's seconds there but 10 minutes later here.... Sam Browne Studs...!

BUT

Thank you for the idea, I had thought of my idea and then forgot it....

Boy thats ugly, watching someone think out loud on a forum...But thats me

 

Sled

here is the finished top...

anyone want to stop by and build one??

 

 

[Sledzep01]

Bump, anyone?