Defensive Line Leathers Report post Posted January 22, 2018 Have recently started doing more trap shooting accessories and made my own patterns for pouches, muzzle tabs, etc. Looking for a pattern for a 8 box and a 4 box Trap Shooting bag. Anyone have anything like this? Similar to the attached picture (Shamrock Leathers) Appreciate the help. Tim Quote Share this post Link to post Share on other sites
dirkba Report post Posted January 29, 2018 An eight and four combination might be extremely heavy to carry around... but if you managed to make your own pouch patterns then this should be an easy challenge! For more guidance see the Stohlman Art of making leather cases Vol 1 page 32 & 33 for a basic layout. Stack 8 cartridge boxes and measure them - repeat with 4 boxes....and apply your mind to attach the half size bag to the large one! Good luck! Quote Share this post Link to post Share on other sites
Fire88 Report post Posted February 3, 2018 12 boxes of shotgun shells is gonna be quite heavy on the shoulder to carry. Quote Share this post Link to post Share on other sites
DV8DUG Report post Posted February 4, 2018 Shotshell bags like the one pictured aren't for carrying 12 boxes. It is for carrying 8 boxes plus accessories in the smaller bag. If you wanted a leather project for carrying 12, you could just rig up a strap to carry the cardboard case as it comes from the store. Quote Share this post Link to post Share on other sites
Defensive Line Leathers Report post Posted February 10, 2018 (edited) I apparently have not made myself clear in asking the question. It wasn't for an 8+4 box case. Either an 8 or a 4 box case. The one pictured is an 8 box with a front accessory bag. They also make a 4 box similar to that, but half the depth. They can be made like that plus 2 side bags for more accessories. No, no one makes a 12 box case,. The max is 8 boxes, which in itself, is kinda heavy. I'll check out the Stohlman reference. Thanks. Edited February 10, 2018 by Defensive Line Leathers Quote Share this post Link to post Share on other sites
Fire88 Report post Posted February 11, 2018 8 or 4 makes sense, I’d stack the boxes the way I wanted them to sit take my measurements from the stack add for the outside miter. Quote Share this post Link to post Share on other sites