Steve GB Posted January 26, 2018 Report Posted January 26, 2018 Hi Would anyone have a template for a leather scissor case in pdf format. I am looking for something not to dissimilar to a sheath. I am not that good at free hand drawing so thought I would ask. Thanks . Regards Stephen Quote
Members Carson Posted January 26, 2018 Members Report Posted January 26, 2018 If you you trace around the scissors then take a compass and mark 1/2 or so from the edge. Quote
Contributing Member fredk Posted January 27, 2018 Contributing Member Report Posted January 27, 2018 Carson has said it. There are so many variations in the shape of scissors its best to draw around the actual pair the sheath is for Quote
Steve GB Posted January 27, 2018 Author Report Posted January 27, 2018 Thanks Carson, sounds so obvious now you mention it. I will give it a go. Quote
Members Grey Drakkon Posted February 1, 2018 Members Report Posted February 1, 2018 That's kinda how I made my snips sheath, just laid the snips on paper, left enough space to account for the leather going around the snips and for stitches, then folded the paper where the bottom goes and cut it out following the drawn shape so it would have a taper and just tidied up the top into a curve to make it easy to remove. Works great! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.