Members TrendyGoat Posted March 17, 2018 Members Report Posted March 17, 2018 Can someone look at my attached pictures and give me any ideas of what I’m doing wrong? I’ve done everything I know to do. Wound a new bobbin, retreaded top thread and bobbin. I’m not sure what brand my machine is. The labels were removed. Any ideas of what you think it may be will be helpful. Thank you. Quote
CowboyBob Posted March 17, 2018 Report Posted March 17, 2018 (edited) Theaded incorrectly,you forgot the run the thread through the takeup lever(the part that moves up & down while your sewing & behind the guard in the front)You need to always stop & start sewing with it all the way up. Edited March 17, 2018 by CowboyBob Quote
CowboyBob Posted March 17, 2018 Report Posted March 17, 2018 Here's a manual for this machine.The threading isn't too clear in it. http://www.consew.com/Files/112347/InstructionManuals/277ROpMan.pdf 277ROpMan.pdf Quote
Members Yetibelle Posted March 19, 2018 Members Report Posted March 19, 2018 On 3/17/2018 at 4:58 PM, CowboyBob said: Theaded incorrectly,you forgot the run the thread through the takeup lever(the part that moves up & down while your sewing & behind the guard in the front)You need to always stop & start sewing with it all the way up. My picture is now "Bob" approved! Quote
Members TrendyGoat Posted March 19, 2018 Author Members Report Posted March 19, 2018 Thank you so much!!!!! As soon as I return home that’s the first on the list. Thank you again for your time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.